12. SETUP MENU
12-10 SETUP Screen
Item | Function, Operation | Variation Range | Initial Setting |
|
|
|
|
H PHASE | For adjusting the horizontal phase of the unit in relation to the signal | 0 | 128 |
| (external sync signal) input through the SYNC IN connector on the left | to |
|
| side of the unit. | 256 |
|
12. SETUP MENU
12-11 Resetting of Camera Menu Setting Values
Using the FILE MANAGE screen, the CAMERA MENU settings can be reset to the initial setting values. On the FILE MANAGE screen, select the file of the CAMERA MENU to be reset, and then perform the resetting operation.
| Delaying the horizontal phase of the unit in relation to the external sync |
|
| |
| signal . |
|
|
|
| ................... | Increase the number |
|
|
| Speeding up the horizontal phase of the unit in relation to the external |
|
| |
| sync signal . |
|
|
|
| ................... | Decrease the number |
|
|
| * Adjustment is not possible if the external sync signal is not input. Possible |
|
| |
| values are indicated by ***. |
|
| |
|
|
|
| |
SC PHASE | For adjusting the | 0 |
| |
| (external sync signal) input through the SYNC IN connector on the left | to | 128 | |
| side of the unit. | 256 |
| |
| Rotating the |
|
| |
| ................... | Increase the number |
|
|
| Rotating the |
|
| |
| ................... | Decrease the number |
|
|
| * Adjustment is not possible if the external sync signal is not input. Possible |
|
| |
| values are indicated by ***. |
|
| |
| The phase will change when the power is turned on/off. The SC phase |
|
| |
| must be adjusted each time the power is turned on. |
|
| |
|
|
|
| |
CAM MIC +48V | To set whether or not 48V voltage should be applied to the MIC IN connector | ON | ON | |
| on the front section. | OFF |
| |
| ON | 48V applied. |
|
|
| OFF | 48V not applied. |
|
|
|
|
|
| |
PAGE BACK | The CAMERA MENU returns when the SHUTTER dial is pressed with | – | – | |
| the cursor at this position. |
|
| |
FILTER
ALARM
MONITOR
NG POWER
2. 3. 4. 5.
SHUTTER dial | 1. STATUS button |
SHUTTER
MENU
|
|
| - - - CAMERA MENU - - - | |
|
|
| SCENE F I L E | : A |
|
|
| VF D I SP L AY MENU |
|
|
|
| OPERAT I ON MENU |
|
Cursor |
|
| PROCESS MENU |
|
|
| F I L E MANAGE |
| |
|
|
| ||
|
|
| SETUP MENU |
|
|
|
| EX I T |
|
|
|
|
|
|
CAMERA MENU screen
|
|
|
| - - - F I L E MANAGE - - - | |
|
|
|
| SCENE | F I L E A |
|
|
| STORE | F I L E | : A |
|
|
| STORE |
|
|
Cursor |
|
| RESET | F I L E | : OFF |
|
| RESET |
|
| |
|
|
|
| ||
|
|
| PAGE BACK |
| |
|
|
|
| RESET OK ? | |
|
|
|
|
|
|
Reset Operation
1. Press the STATUS button for about 1 second to display the CAMERA MENU screen.
2. Turn the SHUTTER dial to align the cursor with the FILE MANAGE item, and then press the SHUTTER dial in the direction of the arrow.
•The FILE MANAGE screen appears in the viewfinder.
3.Choose the file of the CAMERA MENU to be reset (A, B, OFF or ALL)
•If ALL is selected, all the CAMERA MENU files will be reset.
1Turn the SHUTTER dial to align the cursor with the RESET FILE item, and then press the SHUTTER dial in the direction of the arrow.
2Turn the SHUTTER dial to select the file to be reset, and then press the SHUTTER dial in the direction of the arrow.
4.Reset the camera menu settings.
Turn the SHUTTER dial to align the cursor with the RESET item, and then press the SHUTTER dial in the direction of the arrow.
• The “RESET OK?” message message appears in the lower section of the centre of the screen.
When the SHUTTER dial is pressed in the direction of the arrow once more, the CAMERA MENU settings of the selected file are reset to the initial settings.
5.Close the FILE MANAGE screen
Turn the SHUTTER dial to align the cursor with PAGE BACK, and then press the SHUTTER dial in the direction of the arrow.
• The CAMERA MENU screen returns in the viewfinder.
77
FILE MANAGE screen
78
