JVC GY-DV500 Camera Menu Screen Flow, Setting Factory Group Value Contents, Time Code

12. SETUP MENU

12-1 VCR Setup Menu (Cont'd)

				Item			Setting		Factory
Group							Value	Contents
									Setting
		Upper row: Viewfinder display
		Lower row: Counter display indication
SYSTEM	307: LONG PAUSE					3MIN		To select the time (minutes) before the save mode (drum 30MIN
			TIME			30MIN		head rotation stopped) is engaged when the record-
								pause, still or stop condition continues.
					03
	LGPt							3MIN : 3 minutes
					30			30MIN : 30 minutes
								* When used in a cold environment, the setting will be
								3 minutes regardless of the setting.
	396: BATTERY TYPE					12V		To be set in accordance with the used battery back type.

12. SETUP MENU

12-2 Camera Menu Screen Flow

Camera Menu Screen Flow

As illustrated below, the Camera Menu is a menu screen comprising several layers. The first layer of the CAMERA MENU screen is for choosing and setting the menus required in accordance with functions or purposes.

The unit also allows the contents of menu settings to be stored in three files (SCENE FILE A, B, OFF).

•SCENE FILE A, B ........... By performing the FILE STORE operation on the FILE MANAGE screen, the contents of menu settings can be stored and retained in the unit. However, the SET UP menu contents are stored even if the FILE STORE operation is not performed.

Use SCENE FILE A or B to store and retain the contents of menu settings that remain more or less fixed.

•SCENE FILE OFF ........... Whenever you want to change the menu settings, use this SCENE FILE.

The menu setting contents are stored in the unit even if the FILE STORE operation is not performed.

When shooting, select the file with the menu settings to be used from among the three SCENE FILE files on the CAMERA MENU screen.

			13.2V	12V : Choose this setting when using 12V battery				12V
			14.4V			(12V DC Flat Shape type).
				13.2V : Choose this setting when using 13.2V battery
	bAtt	12				(Anton-Bauer Trimpack 13, Propack 13,
		13				Magnum 13, Compack 13).
		14		14.4V : Choose this setting when using 14.4V battery
						(Anton-Bauer Trimpack 14, Propack 14,
						Magnum 14, Compack 14).
					Note:
				•		If this setting is neglected, the unit’s display of
						remaining of battery power and generation of
						battery alarm will not work correctly.
				• This setting is valid when battery pack is used. It
						is invalid when a DC power supply is used.
	398: SSF MODE		OFF	Selection of the S.S.F. (Super Scene Finder) mode.				OFF
			CUE MODE	S.S.F. function:While recording, the time code data of a
			MARK MODE	desired recorded scene is stored in the unit's memory
				when the TAKE button on the front section is pressed.
	SSF		oF	Settings cannot be changed during recording.
			cU	OFF			: S.S.F. function is not available.
			nr	CUE MODE : Selects the CUE mode.
							When the TAKE button is pressed, the
							time code data of the scene recorded
							at that point is stored in the memory.
				MARK MODE : Selects the MARK mode.
							When the TAKE button is pressed the
							first time, the time code of this point is
							stored as start point of the scene. When
							the TAKE button is pressed the second
							time, the time code of this point is stored
							as ending point of the scene.
				For details on the S.S.F. function, see page 60.
				• When the VCR Setup Menu item No. 398 S.S.F. MODE
				is set to CUE or MARK, the time code generator’s
				running method is internally set to the REGEN mode.
TIME CODE	416: NON DROP/DROP		DROP	Selection of the time code generator's framing mode as				DROP
(U-ver. only)			NON DROP	either drop or non-drop mode.
				DROP : The internal time code generator runs in drop
	tcG		dF			mode. Choose this setting when emphasizing
			nF			the recorded time.
				NON DROP: The internal time code generator runs in
							non drop mode. Choose this setting when
							emphasizing the frame number.
ON	516: DISPLAY SELECT		TC	Selection of the appearance of the counter display when				TC
SCREEN			CLOCK	the COUNTER switch is set to “TC” or “UB”.
				TC		: The time code is displayed.
	dSP		tc	CLOCK: The date/time is displayed.
			cL

	- - - VF	D I SP LAY - - -
	SCENE	F I LE	A
F . NO	D I SPLAY		: ON
AUD I O D I SPLAY			: ON
SAFETY ZONE			: OFF
REC	T I ME		: REMA I N
ZEBRA			: 7 0 - 8 0%
PAGE BACK
	- - - OPERAT I ON - - -
	SCENE	F I LE	A
SHUT TER			: STEP
FAW			: NONE
GA I N	L		: 0 dB
GA I N	M		: 9 d B
GA I N	H		: 1 8 dB
SMOOTH TRANS			: OFF
PAGE BACK

- - - CAMERA MENU - - -			- - - PROCESS - - -
SCENE F I L E	: A	SCENE F I LE		A
VF D I SP L AY MENU . .		MASTER	BLACK	: NORMAL
OPERAT I ON MENU . .		DETA I L		: NORMAL
PROCESS MENU . .		DT L . V / H	BAL	: NORMAL
F I L E MANAGE . .		DT L . FREQUENCY		: M I DDLE
SETUP MENU . .		SK I N DT L DETECT		: OFF
EX I T		V RESOLUT I ON		: NORMAL
		ADVANCED PROCESS
		PAGE BACK

- - - F I LE MANAGE - - -

	SCENE	F I LE A
STORE	F I LE	: A
STORE
RESET	F I LE	: OFF
RESET

PAGE BACK

STORE OK?

Normal screen
		- - - SETUP - - -
	H	PHASE	: 1 2 8
	SC	PHASE	: 1 2 8
	CAM M I C + 4 8V		: OFF
	PAGE BACK

- - - ADVANCED PROCESS - - -

SCENE F I L E	A
COLOR MATR I X	: ON
GAMMA	: NORMA L
SK I N COLOR ADJUST . .
PAGE BACK

- - SK I N COLOR AD J UST - -

		ERORR
SK I N COLOR DET .			EXECUTE
SK I N	COLOR RANGE		: NORMA L
PAGE	BACK

69

70