Sharp CD-DH950P operation manual Direct track search, Repeat play, Random play, Programmed play

Page 9

Listening to a CD or MP3/WMA disc (continued)

Note:

If a disc tray with no disc is selected, playback will not start and the disc indicator will disappear.

To stop playback: Press the (CD ) button.

QDirect track search

By using the numeric buttons, the desired tracks on the current disc can be played.

Use the numeric buttons on the remote control to select the desired track while playing the selected disc.

OThe numeric buttons allow you to select up to number 9.

OWhen selecting number 10 or higher, use the “+10” button.

A. For example, to choose 13

1 Press the “+10” button.

2 Press the “1” and then “3”

button.

Selected track number

B. For example, to choose 130

1Press the “+10” button twice.

2Press the “1”, “3” and “0” button.

Notes:

OA track number higher than the number of tracks on the disc cannot be selected.

ODuring random play, direct search is not possible.

QRepeat play

Repeat play can play all 5 discs, all tracks on a chosen disc, single track on a chosen disc, or a programmed sequence continuously.

To repeat one track:

Press the PLAY MODE button once. Press the button.

To repeat one disc:

Press the PLAY MODE button twice. Press the (CD ) button.

To repeat all tracks on up to 5 discs:

Press the PLAY MODE button 3 times. Press the (CD ) button.

To repeat desired tracks:

Perform steps 1 - 6 in “Programmed play” section on page 8 and then press the PLAY MODE button.

To cancel repeat play:

Press the PLAY MODE button again until “ ” disappear.

QRandom play

The tracks on the disc(s) can be played in random order automatically.

To random play all tracks on up to 5 discs:

Press the PLAY MODE button for 2 seconds on the remote

control and then press the (CD ) button.

To cancel random play:

Press the PLAY MODE button. “R” will disappear.

Notes:

OIf you press the button during random play, you can move to the next track by the random operation. On the

other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located.

OIn random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks.)

Caution:

After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc(s) will play continuously.

QProgrammed play

You can choose up to 32 selections for playback in the order you like.

1 While in the stop mode, press the MEMORY button to enter the programming save mode.

2Press one of the 1 - 5 buttons to select the desired disc.

3Press the numeric buttons on the remote control or or button to select the desired track.

4Press the MEMORY button to save the track number.

5Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, press the MEMORY button repeatedly.

If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button.

6Press the (CD ) button to start playback.

Q Programmed play (MP3/WMA)

1 While in the stop mode, press the MEMORY button to enter the programing save mode.

2Press one of the 1 - 5 buttons to select the desired disc.

3Press the PRESET ( or ) button on the remote control to select the desired folder.

Then press the or button on the remote control to select the desired tracks.

4Press the MEMORY button to save the folder and track number.

5Repeat steps 3 - 4 for other folder/tracks. Up to 32 tracks can be programmed.

6Press the (CD/USB ) button to start playback.

To cancel the programmed play mode:

During programmed stop mode, press the (CD ) button. The display will show “MEM CLEAR” and all the programmed contents will be cleared.

Adding tracks to the program:

If a program has been previously stored, the “MEMORY” indicator will be displayed.

Press the MEMORY button. Then follow steps 3 - 4 to add tracks.

Notes:

OWhen a disc is ejected, the program is automatically canceled.

OIf you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will be cleared.

ODuring the program operation, random play is not possible.

ODo not mix CD with MP3/WMA discs during programming.

E-8

Image 9
Contents Special Note AccessoriesSpecial Notes Explanation of Graphical SymbolsImportant Safety Instructions PrecautionsAdditional Safety Information GeneralVolume control PrecautionsFor U.S. customer only System connectionRemote control Battery installationSystem connections General control Listening to the iPod or iPhone Watching videos on a TV connected to Listening to a CD or MP3/WMA discIPod or iPhone To specify a disc to playRepeat play Direct track searchRandom play Programmed playTo play back USB/MP3 player with folder mode on To play back USB/MP3 player with folder mode offListening to USB mass storage device/MP3 player Advanced USB playbackListening to the radio Setting the clock Remote control only Timer and sleep operation Remote control onlyListening to a cassette tape Timer and sleep operation Remote control only Timer playbackSleep operation Enhancing your system Troubleshooting chartTroubleshooting chart MaintenanceSpecifications AmplifierSpeaker

CD-DH950P specifications

The Sharp CD-DH950P is a versatile and modern compact audio system designed to cater to music enthusiasts who appreciate high-quality sound and advanced technology. With its stylish design and user-friendly interface, this device is perfect for both home use and small gatherings.

One of the standout features of the Sharp CD-DH950P is its powerful dual speaker system, which delivers a rich and immersive audio experience. With a total output power of 100 watts, the system provides robust bass and clear treble, ensuring that every note and beat is heard as intended. The speakers are engineered to optimize sound distribution, making it ideal for larger rooms or outdoor settings.

The Sharp CD-DH950P supports various playback formats, including CD, MP3, and USB, making it a versatile choice for music lovers. It features a built-in CD player that can handle standard CDs and CD-R/RW discs, allowing users to enjoy their favorite albums without limitations. Additionally, the USB port enables users to connect flash drives, making it easy to access and play digital music files directly from their devices.

Connectivity is another key aspect of the Sharp CD-DH950P. The system is equipped with Bluetooth technology, allowing users to wirelessly stream music from smartphones, tablets, or other Bluetooth-enabled devices. This feature facilitates easy access to streaming services and personal music libraries, enhancing the overall listening experience. For those who prefer traditional connections, the system includes an AUX input and an FM radio tuner, providing multiple options for audio playback.

The user-friendly interface of the Sharp CD-DH950P includes an easy-to-read LCD display, revealing song information and playback settings. The system features a remote control, offering convenience when adjusting volume or switching tracks from a distance.

In terms of design, the Sharp CD-DH950P boasts a sleek and modern aesthetic, making it an appealing addition to any room. Its compact size allows for easy placement on shelves or countertops without occupying too much space.

Overall, the Sharp CD-DH950P is a feature-rich compact audio system that combines performance, versatility, and style. Whether you’re hosting a party, relaxing at home, or looking to enjoy high-quality music, this system is designed to meet a variety of audio needs while delivering exceptional sound quality.