Alpine cdm-9821, CDM-9823 owner manual Specifications, Indication for CD

Indication for CD

– – – H

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

– – – E

•Mechanism error.

1.Press the c button and eject the CD.

If not ejecting, consult your Alpine dealer.

2.When the error indication remains after ejecting, press the c button again.

If the error indication still does not turn off after pressing the c button for a few times, consult your Alpine dealer.

Note

When the "- - - E" is displayed:

In case that the disc cannot be ejected by pressing the c button, press the RESET switch (refer to page 4) and press the c button again.

If not ejecting, consult your Alpine dealer.

T – – –

•No CD is inserted. - Insert a CD.

Indication for CD Changer

–– – H

•Protective circuit is activated due to high temperature.

-The indicator will disappear when the temperature returns to within operation range.

E - 01

•Malfunction in the CD Changer.

-Consult your Alpine dealer. Press the magazine eject button and pull out the magazine.

Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer.

•Magazine ejection not possible.

-Press the magazine eject button. If the magazine does not eject, consult your Alpine dealer.

– – – –

•No magazine is loaded into the CD Changer. - Insert a magazine.

T – – –

•No indicated disc.

- Choose another disc.

E E E E

Specifications

FM TUNER SECTION

Tuning Range	87.7 – 107.9 MHz
Mono Usable Sensitivity	9.3 dBf (0.8 ∝V/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 ∝V/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
AM TUNER SECTION
Tuning Range	530 – 1,710 kHz
Sensitivity (IEC Standard)	22.5 ∝V/27 dB
CD PLAYER SECTION
Frequency Response	5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Bleow measurable limits
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)
PICKUP
Wave length	795 nm
Laser power	CLASS I
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Power Output	18 W RMS ⋅ 4*(CDM-
	9823 only)
	16W RMS ⋅ 4*(CDM-9821
	only)

*Primary amplifier ratings per CEA-2006 Standard

•Power output: measured at 4 Ohms and ≤ 1% THD+N

•S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2 V/10 k ohms

Bass	±14 dB at 60 Hz
Treble	±14 dB at 10 kHz
Weight	1.5 kg (3 lbs. 5 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	160 mm (6-1/4")
NOSEPIECE SIZE
Width	170 mm (6–3/4")
Height	46 mm (1-13/16")
Depth	20 mm (11/16")

Due to continuous product improvement, specifications and design are subject to change without notice.

•Misconnection or disconnection of CD Changer.

- Check connection between CD Changer and control

unit. 13-EN