Alpine CDM-9823, cdm-9821 owner manual Installation and Connections, Precautions

Page 16

Installation and Connections

Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use.

Warning

MAKE THE CORRECT CONNECTIONS.

Failure to make the proper connections may result in fire or product damage.

USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.

(Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.

Failure to do so may result in electric shock or injury due to electrical shorts.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS.

Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals, etc. can be extremely hazardous.

DO NOT SPLICE INTO ELECTRICAL CABLES.

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.

When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT.

Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.

The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.

Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE.

Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.

Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

Precautions

•Be sure to disconnect the cable from the (–) battery post before installing your CDM-9823/CDM-9821. This will reduce any chance of damage to the unit in case of a short-circuit.

•Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the unit to malfunction or damage to the vehicle’s electrical system.

•When making connections to the vehicle’s electrical system, be aware of the factory installed components (e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the CDM- 9823/CDM-9821 to the fuse box, make sure the fuse for the intended circuit of the CDM-9823/CDM-9821 has the appropriate amperage. Failure to do so may result in damage to the unit and/or the vehicle. When in doubt, consult your ALPINE dealer.

•The CDM-9823/CDM-9821 uses female RCA-type jacks for connection to other units (e.g. amplifier) having RCA connectors. You may need an adaptor to connect other units. If so, please contact your authorized ALPINE dealer for assistance.

•Be sure to connect the speaker (–) leads to the speaker

(–) terminal. Never connect left and right channel speaker cables to each other or to the vehicle body.

IMPORTANT

Please record the serial number of your unit in the space provided below and keep it as a permanent record. The serial number plate is located on the bottom of the unit.

SERIAL NUMBER:

INSTALLATION DATE:

INSTALLATION TECHNICIAN:

PLACE OF PURCHASE:

14-EN

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CDM-9823 CDM-9821 Alpine CD Changers Give You More CHA-S634CHA-1214CHM-S630Contents Temperature MaintenanceMoisture Condensation Damaged DiscInstallation Location Disc CleaningDisc Accessories Never Attempt the FollowingBasic Operation Setting the AUX Mode Audio Mute FunctionSetting the Bass Control Setting TimeDisplaying Time Setting the Treble Control Setting the Bass Type Manual Tuning Automatic Seek TuningManual Storing of Station Presets Radio OperationAutomatic Memory of Station Presets Tuning to Preset StationsTo customers using CD-R/CD-RW Inserting/Ejecting DiscNormal Play and Pause About playable mediaMusic Sensor Skip Fast Forward and BackwardRepeat Play X. Random PlayInformation Case of DifficultySpecifications Indication for CDInstallation and Connections PrecautionsInstallation Removal5Ignition Key Battery Connections17-EN Limited Warranty

cdm-9821, CDM-9823 specifications

The Alpine CDM-9823 and CDM-9821 are high-performance in-dash car CD players known for their advanced features and superior sound quality. These models are particularly popular among automotive audio enthusiasts due to their user-friendly design and cutting-edge technology.

One of the main features of both models is their ability to support a wide range of audio formats. They can play standard CDs, CD-Rs, and CD-RWs, which allows users to enjoy a variety of music options. In addition to traditional CDs, these models are also compatible with MP3 and WMA files. This compatibility offers versatility as users can easily create custom playlists on disc, enhancing the overall listening experience.

Another notable characteristic of the CDM-9823 and CDM-9821 is their powerful 52 watts x 4 channel built-in amplifier. This robust amplification ensures crisp sound reproduction and deep bass, providing an immersive audio experience. Additionally, both units feature advanced audio equalization options, allowing users to fine-tune sound settings according to their preferences and vehicle acoustics.

In terms of technology, the CDM-9823 and CDM-9821 are equipped with a high-quality digital-to-analog converter (DAC), ensuring that music playback is clear and vibrant. This technology contributes to the overall sound quality, making it a significant selling point for audiophiles. Moreover, both models come with a detachable faceplate for increased security against theft.

The displays on these models are designed for optimum visibility, even in bright sunlight. Users can easily navigate through tracks and settings thanks to the intuitive interface. Additionally, the inclusion of a remote control in the package enhances convenience, allowing users to manage playback without the need to reach for the unit.

Furthermore, they incorporate features like a built-in AM/FM tuner, which provides access to a wide range of radio stations, expanding listening options beyond just CDs. The easy-to-use tuning dial and preset station functions streamline the process of finding favorite radio channels.

Overall, the Alpine CDM-9823 and CDM-9821 are excellent choices for anyone looking to upgrade their in-car audio system. With their blend of sound quality, user-friendly features, and advanced technology, these CD players stand out in the competitive landscape of automotive audio solutions, catering to the needs of a diverse audience of music lovers. Whether for long road trips or daily commutes, these models deliver an exceptional auditory experience.
Top Page Image Contents