Fellowes W11C manual Product Profile, While setting up shredder, While operating shredder

Page 4

Product Profile

This product is built to shred paper, staples and credit cards.

It is not built to take paper clips, continuous forms, adhesive labels, transparencies, newspaper, cardboard or any plastic other than credit cards. Using it for these purposes is likely to cause irreparable damage.

 

Confetti-cut

Sheet capacity*

11 sheets

Paper shred size

5/32" x 2" (3.9 x 50 mm)

Maximum paper width

9" (229 mm)

Recommended daily capacity

25-50 shredding passes

Maximum running time

5 minutes

Automatic cool-down period

20 minutes

*Based on 20 lb., 8-1/2" x 11" paper with shredder operating at rated voltage; heavier paper, high humidity, or other than rated voltage may reduce sheet capacity.

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING

While setting up shredder

Check shredder for damage or defects; some paper particles in the basket are normal due to product testing and does not indicate a defect.

Avoid touching exposed blades on underside of confetti-cut shredder head.

Plug power cord in an outlet that can easily be reached.

Do not place shredder near or over a heat or water source.

While operating shredder

• Keep hands and hanging objects (jewelry, ties, loose clothing, long hair, etc.) away from paper entry.

• Keep children and pets away from the shredder.

When not in use

Always turn off and unplug shredder.

Unplug before emptying basket.

Do not open shredder head: Danger of electric shock.

NOTE: Do not use flammable synthetic oil, petroleum-based products or aerosols of any kind on or near product at any time.

3

Image 4
Contents Get More Done Today Page Contents While setting up shredder When not in useProduct Profile While operating shredderSet-Up OperationTo shred PaperTroubleshooting MaintenanceSymptom Remedy Customer Service Limited WarrantyHelp Line
Related manuals
Manual 2 pages 42.88 Kb