PLAYING COMPACT DISCS
IMPORTANT: This CD player can play normal CDs plus CD Recordable
1.) Press the STANDBY/ON button to turn the system ‘On’.
2.) Press the CD button on the front panel of the main unit or the FUNCTION button on the remote controls to select the CD function.
3.) Press the OPEN/CLOSE button on the top panel to open the CD door. The main display shows “– – –
4.) Place a CD properly seated on the center spindle with the printed label side facing upward. Gently press down on the disc near the center hole to make sure that it is properly seated on the spindle.
5.) Close the CD door. The disc will spin and ‘00 00:00’will flash in the display as the player reads the table of contents on the disc. Within a few seconds the disc will stop spinning and the display will show the total playing time and total tracks on the disc.
Track Number | Playing Time |
Note: If the disc is inserted upside down or if the disc is badly scratched and unreadable, playback will not be possible. In this case the main display will show “no dISC”. Remove the disc and re insert it properly, or try another disc.
18
ES58_012904.p65 | 18 |
29/1/2004, 15:24