Sony XE-90MKII operating instructions Specifications, Fuse Replacement, General

Specifications

Center frequencies

50 Hz, 100 Hz, 200 Hz,

400 Hz, 800 Hz, 1.5 kHz,

3 kHz, 6 kHz, 12 kHz

Boost/cut range ± 12 dB Sub-woofer cut-off frequency

	80 Hz, 120 Hz (at -3dB)
	Output gain: - 00 to + 8 dB
	(cut-off slope -12dB/oct)
Frequency	response
	5 Hz -100		kHz ~gdB
Signal-to-noise ratio			105 dB
	More	than
	(A-weighted)
Harmonic distortion (at 1 kHz)
	Less	than	0.005%
Gain	0 dB
General
Input	Line	inputs	(phono	jacks)
	x 1
Output	Line	outputs (phono		jacks)
	x3

Power requirements

12 V DC car battery (negative ground)

Current drain 300 mA Input remote current

4mA

Mounting dimensions

178 x 25 x 135 mm (w/h/d)

(71/8 x 1 x 53/8 inches)

WeightApprox. 650 g (1 Ib 7 oz) Accessories supplied

Mounting hardware (1 set) Connecting cord (1 set)

Design and specifications subject to change without notice.

Fuse Replacement

If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In this case, consult your nearest Sony dealer.

Warning

Use the specified ampere fuse. Use of a higher amperage fuse may cause serious damage.

8