Bogen A12 specifications Package Contents, Speaker Orientation

Page 2

PACKAGE CONTENTS

Near A12 Speaker (1)

Mounting Knobs (2)

Yoke (1)

Rubber Friction Disk (2)

Safety Attachment Bolt (1)

Owner’s Guide (1)

SPEAKER ORIENTATION

RIGHT

WRONG

The NEAR A12 is acoustically designed to operate in a vertical orientation with the NEAR logo right side up. This orientation will provide 90 degrees of hori- zontal coverage and 45 degrees of vertical coverage.

RIGHT

WRONG

The A12 is a ported speaker, designed to shed water, and includes a unique water-repellent scrim.This scrim covers the ports and horn throat to slow the ingress of water, but a small amount of water may still enter the cabinet.Weep holes are provided at the bottom of the speaker baffle to drain any water that enters the cabinet.

NOTE: It is very important that the speaker be mounted with its face either vertical or facing down. Never install the speaker with the face tilted up, as this will undermine the water-shedding aspects of the design and allow excessive water to enter the cabinet.

Image 2
Contents OWNER’S Guide Package Contents Speaker OrientationSome Factorsto Consider Yoke InstallationMountingthe Speaker Ontheyoke REAR-PANEL Connections Underpowering VS. OverpoweringPainting 70V System Configuration LOW-IMPEDANCE System ConfigurationTotal load impedance can be calculated this way Limited Warranty Exclusion of Certain Damages Spring Street, Ramsey, New Jersey 07446, USA