Getting Started
Resetting the unit
Before operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the reset button with a pointed object such as a
Front panel detached
Reset button
| Note | |
EN | Pressing the reset button will erase the clock and some | |
memorized functions. | ||
|
Detaching the front panel
You can detach the front panel of this unit to prevent the unit from being stolen.
1 Press (OFF).
2 Press (OPEN) to open up the front panel, then pull it off towards you.
Notes
•Do not put anything on the inner surface of the front panel.
•Be sure not to drop the panel when detaching it from the unit.
•If you detach the panel while the unit is still on, the power will turn off automatically to prevent the speakers from being damaged.
•When you carry the front panel with you, put it in the supplied front panel case.
Attaching the front panel
Align the front panel with the unit, and push in.
Notes
•Be sure not to attach the front panel upside down.
•Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit.
•Do not press hard or put excessive pressure on the display of the front panel.
•Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature.
Caution alarm
If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch on the bottom of the unit is set to the A position).
Preparing the rotary remote
When you mount the rotary remote, attach the label in the illustration below.
LIST
MODE
SOUND
SOUND
MODE
LIST
4