Other Functions, Using the rotary remote

Displaying the station name

Press (DSPL) during radio reception.

FM1

SUR EQ	2 WRKISS

Each time you press (DSPL), the item changes as follows:

z Frequency z Clock z Station name*

*If the station name is not stored, “NO Name” appears in the display for one second.

Erasing the station name

1 Tune in any station and press (LIST) for two seconds.

2 Press (DSPL) for two seconds.

“Delete” and the station name appear in the display.

3 Rotate the dial to select the name that you want to erase.

4 Press (5) (ENTER) for two seconds. The name is erased.

Repeat steps 3 and 4 if you want to erase other names.

5 Press (LIST) for two seconds.

The unit returns to the normal radio reception mode.

Locating a station by frequency and name — List-up

You can search for the memorized stations names in the display.

1 Press (LIST) momentarily.

The frequency or the name assigned to the station currently receiving appears in the display.

LST

SUR EQ	2 WRKISS
	2 WRKISS
	ENTER

2 Press (LIST) repeatedly until you find the desired station.

3 Press (5) (ENTER) to tune in the desired station.

Note

Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode.

To go back to the normal mode, press (DSPL).

Other Functions

Using the rotary remote

The rotary remote works by pressing buttons and/or rotating controls.

You can control the optional CD or MD changer with the rotary remote.

By pressing the button (the SOURCE button)

(SOURCE)

(MODE)

Each time you press (SOURCE), the source changes as follows:

Tuner nCD nMD nTape

Pressing (MODE) changes the operation in the following ways

•the tape transport direction

•the band: FM1 nFM2 nAM

•the CD changer: CD1 nCD2 n....

•the MD changer: MD1 nMD2 n....

Tip

You can turn on this unit by pressing (SOURCE) on the rotary remote.

By rotating the control (the SEEK/AMS control)

Rotate the control momentarily and release it to:

•Locate the beginnings of the tracks on the tape. Rotate and hold the control, and release it to fast-wind the tape. To playback, rotate and hold the control again, and release it.

•Locate a specific track on a disc. Rotate and hold the control until you locate the specific point in a track, then release it to start playback.

Sony XR-C750 operating instructions Other Functions, Using the rotary remote

FM1

2 WRKISS