Sharp MD-SR60E Character information track names Disc names, etc, Tr. Protect, Being erased

Page 43

ERROR MESSAGES

NO SIGNAL

MEANING

●Poor connection of the digital cable.

●No output signal comes out from the connected unit to playback.

REMEDY

●Connect the digital cable securely.

●If the portable CD player has a function to prevent sound skips, deactivate it.

●Playback with the connected unit.

References

PLAY MD

● You recorded on a playback-only

● Replace it with a recordable disc.

disc.

 

 

 

POWER ?

● Improper power is being supplied.

● Use one of the specified power sources.

 

 

 

 

● The write protection tab of a MiniDisc

● Move the write protection tab back to its original position.

PROTECTED

is set to the protected position.

● Replace it with a recordable MiniDisc.

 

● You tried to record on a playback-

 

 

only disc.

 

SORRY

● Since a track number is currently

● Wait for a while and try the operation again.

 

being located or written to, the unit

 

 

cannot accept your command.

 

 

 

 

TEMP OVER

● The temperature is too high.

● Turn off the power, and wait for a while.

TOC FORM (**)

● There is an error in the recording

● Erase all of the tracks, and then record again.

signal.

 

 

● There is no space left for recording

● Replace it with another recordable disc.

TOC FULL

character information (track names,

 

 

disc names, etc.).

 

Tr. Protect

● The track has been protected from

● Edit the track with the device on which it was recorded.

being erased.

 

 

 

 

 

 

 

● A disc which contains data other than

● A disc which contains non-music data cannot be

? DISC

music was played.

played.

● There is an error in the signal re-

● Replace it with another recorded disc.

 

 

corded on the disc.

 

Number or symbol appears in (*) position.

4342

**06-REFERENCES

43

02.07.2000, 10:04 AM

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Thank you for purchasing this Sharp product Portable Minidisc RecorderPlayback ContentsConnections RecordingSpecial Notes Service InformationIntroductionImportant Storing the unit PrecautionsAvoid using or leaving the unit in the following places Places where sand can easily enterMain unit Names of Controls and IndicatorsImportant Introduction Remote control unitDisplay panel Connection Cable AccessoriesAC Adaptor Rechargeable Remote Control x Headphones x AD-N70BT xInserting a MiniDisc PreparationRed To Right White To Left Connections910 AC 230-240V 50/60HzTo the Optical Line in socket AC 230-240V 50/60Hz To the DC in 5V socket112 OperationBasic RecordingBasic operation To write recorded contents on the MiniDiscTo stop recording Before Playback 134Socket To interrupt playback Volume controlTo turn off the power Bass controlPlayback sound-actuated recording Synchronized recording Useful FeaturesAdvanced Recording 156Start recording FeaturesDouble time recording in monaural mode Press the Mode button whilst the record- ing is pausedYou can erase a portion of a track and make a new recording To cancel the operation, press the /OFF button178 To start recording from the middle of trackTo create your own track numbers Helpful tip when attaching a labelWhen a recording is paused or whilst recording… UsefulAbout track numbers 1920About sampling rate converter Press the 06 button whilst recording Recording from a MicrophoneTo record from a microphone To interrupt a recordingAbout pause function Sound-actuated recording Mic Synchronized recordingRecording sensitivity can be changed, whilst recording Changing intervals between tracks Track intervalsDuring a mic manual recording During a mic synchro recordingTo locate the desired portion Advanced playback2316 To locate the beginning of a trackTo return to normal playback To play at double speed Mono recording onlyRandom play or repeat play To interrupt fast playbackDuring playback, press the Disp button Checking Displays2518 To check the elapsed time and remaining time of the trackVidual track To display the playing time of an indiWill flash, and battery will begin charging Battery PowerCharging the rechargeable battery Insert the rechargeable battery from + marked sideDo not disassemble the battery Using with the rechargeable or alkaline batteryAbout charging time Hold Function Move the Hold switch to the safety positionDirection indicated by the arrow Listening through a car stereo Listening through a stereo sytemRed White 312 Titling a MiniDiscCreating disc and track names To enter a space Advanced FeaturesCharacters symbols To erase a charactor334 AdvancedStamping titles from another MiniDisc Load a MiniDisc for stamping Press the ENTER/SYNC button Operation of the MiniDisc for stampingTo erase all of the tracks at once Editing a recorded MiniDisc356 To erase tracks one at a timeTo combine tracks To divide a trackTo move a track 378Auto play Changing default settingsAuto power save Beep sound3940 Other Features and CautionAbout the rechargeable battery ReferencesYou erase short tracks MiniDisc System Limitations412 Error MessagesBeing erased Character information track names Disc names, etcTr. Protect Track has been protected fromSome sounds are skipped TroubleshootingUnit does not turn on PhonesTo remove condensation MaintenanceClean the plugs and the connecting socket If trouble occurs Moisture condensation456 SpecificationsIndex B0002.TO Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE

MD-SR60E specifications

The Sharp MD-SR60E is a compact and versatile MiniDisc player and recorder that epitomizes the cutting-edge technology and design ethos of its time. Renowned for its high-quality audio performance, this device is an essential tool for music lovers and audio professionals alike.

One of the standout features of the MD-SR60E is its ability to record audio in high fidelity. The unit employs Sharp’s advanced Digital Signal Processing technology, ensuring that recordings are clear and precise. Whether you are capturing live performances or simply enjoying your favorite albums, the MiniDisc format provides a superior audio experience with minimal loss in quality. Additionally, the device supports ATRAC (Adaptive Transform Acoustic Coding) compression, allowing for efficient storage without compromising sound integrity.

The MD-SR60E also features a user-friendly interface that makes navigation intuitive. With its easy-to-read LCD display, users can quickly access track information and manage their playlists. Furthermore, the device supports track editing features such as fading and renaming, offering a customizable listening experience.

Portability is another major advantage of the MD-SR60E. Its lightweight design facilitates on-the-go use, making it an excellent choice for those who enjoy music during travel or outdoor activities. The built-in rechargeable battery delivers hours of playback time, ensuring that your music experience isn't interrupted, even during extended use.

Connectivity is a key aspect of the MD-SR60E, which includes standard headphone and microphone jacks as well as optical digital outputs for superior sound quality when connecting to external audio systems. This flexibility allows users to integrate the player seamlessly into their existing audio setups.

Additionally, the Sharp MD-SR60E supports a wide range of audio formats, further enhancing its versatility. Whether you’re listening to recorded tracks or live performances, the device accommodates various audio needs, ensuring a tailored listening experience.

In summary, the Sharp MD-SR60E is not just a MiniDisc player; it's a comprehensive audio solution that combines innovative technology with user-oriented design. Its high-fidelity recording capabilities, intuitive interface, portability, and extensive connectivity options make it a standout choice for audiophiles and casual listeners alike. Whether you’re recording new tracks or enjoying classic albums, the MD-SR60E delivers exceptional performance and reliability.
Top Page Image Contents