Sharp MD-SR60E operation manual Specifications, 456

Page 46

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.

The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

References

456

■ General

Power source:

 

DC 1.2V:

Rechargeable Nickel-Metal Hydride battery

 

(AD-N70BT) x 1

DC 5V:

AC adaptor (AC 230 - 240V, 50/60 Hz)

DC 1.5V:

Commercially available, “AA” size (LR6), al-

 

kaline battery x 1

DC 4.5V:

Separately available car adaptor, AD-CA20X

 

(for cars with a 12-24V DC negative earth elec-

 

trical system)

Power consumption: 7 W (AC adaptor)

Output

RMS; 20 mW (10 mW + 10 mW)

power:

(0.2% T.H.D.)

Charging

Approx. 3.5 hours (90 %)

time:

Approx. 5.5 hours (fully charged)

 

(When using the AC adaptor included with the unit)

Battery life:

When using the rechargeable

When using a commercially

battery (fully charged) in-

available, high capacity, “AA”

cluded with the unit

size (LR6), alkaline battery

Continuous recording:

Continuous recording:

Approx. 4.5 hours

Approx. 3 hours

Continuous play:

Continuous play:

Approx. 6.5 hours

Approx. 7 hours

●The continuous recording time is for analogue inputs when the volume level is set to “VOL 0”.

●The continuous play time shows the value when the volume level is set to “VOL 15”.

●The above values are the standard values when the unit is charged and used at an ambient temperature of 20°C (68°F).

●The operating time when using an alkaline battery may be dif- ferent, depending on the type and manufacturer of the battery, and on the operating temperature.

Input sensitivity:

Recording level

 

Reference input level

 

Input impedance

MIC H

 

 

0.25 mV

 

 

10 k ohms

MIC L

 

 

2.5 mV

 

 

10 k ohms

LINE

 

 

100 mV

 

 

20 k ohms

Output level:

 

 

 

 

 

 

 

 

 

Specified

Maximum

 

Load

 

 

 

output

output level

impedance

Headphones

 

 

—

10 mW + 10 mW 16 ohms

LINE

250 mV (-12 dB)

—

 

10 k ohms

Dimensions:

 

 

Width:

99.9 mm (3-15/16”)

 

 

 

Height:

22.9 mm (29/32”)

Weight:

 

 

Depth:

77.9 mm (3-3/32”)

 

 

191 g (0.42 lbs.) with rechargeable battery

Input socket:

 

 

Line/optical digital, microphone

Outputsocket:

 

(powered by the main unit)

 

 

Headphones (impedance: 16 ohms)/remote

 

 

 

control unit

 

 

 

 

■MiniDisc Recorder

Type:Portable MiniDisc recorder

Signal readout: Non-contact, 3-beam semi-conductor laser pick-up

Audio channels: Stereo 2 channels/monaural (long-play mode) 1 channel

Frequency response: 20 – 20,000 Hz (± 3 dB)

Rotation speed: Approx. 400 – 900 rpm

Error correction: ACIRC (Advanced Cross Interleave Reed- Solomon Code)

Coding:ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed type

Recording method: Magnetic modulation overwrite method

Sampling frequency:44.1 kHz (32 kHz and 48 kHz signals

are converted to 44.1 kHz, and then recorded.) Wow and flutter: Unmeasurable (less than ±0.001% W. peak)

**06-REFERENCES

46

02.07.2000, 10:04 AM

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Portable Minidisc Recorder Thank you for purchasing this Sharp productRecording ContentsConnections PlaybackService Information Special NotesIntroductionImportant Places where sand can easily enter PrecautionsAvoid using or leaving the unit in the following places Storing the unitNames of Controls and Indicators Main unitImportant Introduction Remote control unitDisplay panel AD-N70BT x AccessoriesAC Adaptor Rechargeable Remote Control x Headphones x Connection CablePreparation Inserting a MiniDiscAC 230-240V 50/60Hz Connections910 Red To Right White To LeftAC 230-240V 50/60Hz To the DC in 5V socket To the Optical Line in socketRecording OperationBasic 112Basic operation To write recorded contents on the MiniDiscTo stop recording Before Playback 134Socket Bass control Volume controlTo turn off the power To interrupt playback156 Useful FeaturesAdvanced Recording Playback sound-actuated recording Synchronized recordingPress the Mode button whilst the record- ing is paused FeaturesDouble time recording in monaural mode Start recordingTo start recording from the middle of track To cancel the operation, press the /OFF button178 You can erase a portion of a track and make a new recordingUseful Helpful tip when attaching a labelWhen a recording is paused or whilst recording… To create your own track numbersAbout track numbers 1920About sampling rate converter To interrupt a recording Recording from a MicrophoneTo record from a microphone Press the 06 button whilst recordingAbout pause function Sound-actuated recording Mic Synchronized recordingRecording sensitivity can be changed, whilst recording During a mic synchro recording Track intervalsDuring a mic manual recording Changing intervals between tracksTo locate the beginning of a track Advanced playback2316 To locate the desired portionTo interrupt fast playback To play at double speed Mono recording onlyRandom play or repeat play To return to normal playbackTo check the elapsed time and remaining time of the track Checking Displays2518 During playback, press the Disp buttonTo display the playing time of an indi Vidual trackInsert the rechargeable battery from + marked side Battery PowerCharging the rechargeable battery Will flash, and battery will begin chargingDo not disassemble the battery Using with the rechargeable or alkaline batteryAbout charging time Hold Function Move the Hold switch to the safety positionDirection indicated by the arrow Listening through a car stereo Listening through a stereo sytemRed White 312 Titling a MiniDiscCreating disc and track names To erase a charactor Advanced FeaturesCharacters symbols To enter a space334 AdvancedStamping titles from another MiniDisc Operation of the MiniDisc for stamping Load a MiniDisc for stamping Press the ENTER/SYNC buttonTo erase tracks one at a time Editing a recorded MiniDisc356 To erase all of the tracks at onceTo divide a track To combine tracks378 To move a trackBeep sound Changing default settingsAuto power save Auto playReferences Other Features and CautionAbout the rechargeable battery 3940MiniDisc System Limitations You erase short tracksError Messages 412Track has been protected from Character information track names Disc names, etcTr. Protect Being erasedPhones TroubleshootingUnit does not turn on Some sounds are skippedIf trouble occurs Moisture condensation MaintenanceClean the plugs and the connecting socket To remove condensationSpecifications 456Index Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE B0002.TO

MD-SR60E specifications

The Sharp MD-SR60E is a compact and versatile MiniDisc player and recorder that epitomizes the cutting-edge technology and design ethos of its time. Renowned for its high-quality audio performance, this device is an essential tool for music lovers and audio professionals alike.

One of the standout features of the MD-SR60E is its ability to record audio in high fidelity. The unit employs Sharp’s advanced Digital Signal Processing technology, ensuring that recordings are clear and precise. Whether you are capturing live performances or simply enjoying your favorite albums, the MiniDisc format provides a superior audio experience with minimal loss in quality. Additionally, the device supports ATRAC (Adaptive Transform Acoustic Coding) compression, allowing for efficient storage without compromising sound integrity.

The MD-SR60E also features a user-friendly interface that makes navigation intuitive. With its easy-to-read LCD display, users can quickly access track information and manage their playlists. Furthermore, the device supports track editing features such as fading and renaming, offering a customizable listening experience.

Portability is another major advantage of the MD-SR60E. Its lightweight design facilitates on-the-go use, making it an excellent choice for those who enjoy music during travel or outdoor activities. The built-in rechargeable battery delivers hours of playback time, ensuring that your music experience isn't interrupted, even during extended use.

Connectivity is a key aspect of the MD-SR60E, which includes standard headphone and microphone jacks as well as optical digital outputs for superior sound quality when connecting to external audio systems. This flexibility allows users to integrate the player seamlessly into their existing audio setups.

Additionally, the Sharp MD-SR60E supports a wide range of audio formats, further enhancing its versatility. Whether you’re listening to recorded tracks or live performances, the device accommodates various audio needs, ensuring a tailored listening experience.

In summary, the Sharp MD-SR60E is not just a MiniDisc player; it's a comprehensive audio solution that combines innovative technology with user-oriented design. Its high-fidelity recording capabilities, intuitive interface, portability, and extensive connectivity options make it a standout choice for audiophiles and casual listeners alike. Whether you’re recording new tracks or enjoying classic albums, the MD-SR60E delivers exceptional performance and reliability.
Top Page Image Contents