Sharp MD-MT180H operation manual About the TOC, Helpful tip when attaching a label

Page 14

MD-MT180H

ENGLISH

Recording (continued)

Basic Operation -Recording-

About the TOC

After any recording or editing function, "TOC" (Table Of Contents) is displayed. To finalise the recording or editing function, turn the power off. During this process "TOC" will flash and "TOC EDIT!" will be displayed. During any recording or editing function, the MiniDisc unit lid is locked, and the MiniDisc cannot be removed until the pro- cess is finalised.

Warning:

If the power is removed (Battery/AC adaptor) whilst "TOC" is displayed, the MiniDisc unit lid will remain locked until the battery/main power is restored and the unit is turned on. Your new recordings or edited changes will be lost and your MiniDisc may become unusable.

Caution:

Whilst "TOC" or "TOC EDIT!" is displayed, follow the instructions below.

-Do not jerk or bump the unit.

-Do not unplug the AC adaptor.

-Do not remove the battery.

-Do not subject the unit to shock.

Otherwise, tracks may not be recorded properly.

￿To prevent recorded MiniDiscs from being

erased accidentally

Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indicated by the arrow.

The MiniDisc will then be protected against accidental erasure.

Recordable Recording prevented

To add a recording to such a MiniDisc, slide the acciden- tal erase prevention tab back to its original position.

￿

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and you may not be able to remove it.

If the label peels off or partially lifts away, replace it with a new one.

Do not put a new label on top of an ex- ￿isting one.

Attach the label only in the specified location.

E-13

01/10/11 180H_E_3.fm

Image 14
Contents MD-MT180H Contents IntroductionSpecial Notes AccessoriesOptional Accessories SpecialMain unit Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators ReferenceDisplay panel Storing the unit PrecautionsPrecautions Charging the rechargeable battery Using with the Rechargeable BatteryPower Source -Using with the Rechargeable Battery Insert the rechargeable batteryUsing with the AC Adaptor Power Source -Using with the AC AdaptorUsing Using with the Alkaline BatteryAlkaline Battery WithInserting a MiniDisc Inserting a MiniDiscConnections ConnectionsBasic Operation -Recording Cancel the hold modeRecording Before recordingTo stop recording To update the recorded contents of the Mini- DiscTo interrupt recording Helpful tip when attaching a label About the TOCPlayback Basic Operation -PlaybackBasic Operation -Playback/Hold Function To cancel the hold modeHold Function Bass controlTo locate the desired portion Useful Features -Advanced PlaybackAdvanced Playback To locate the beginning of a trackTo return to normal playback To play at double speedTo interrupt fast playback Random play or repeat playPress the MENU/CHRG button repeatedly to se Long-play recordingStart recording Monaural recordingRecording About the recording modeIndication Recording mode Useful -AdvancedPress the ENTER/SYNC button again Useful Features -Advanced RecordingPlayback sound-actuated recording Begin playback on the stereo systemTo start recording from the middle of a track Numbering restriction To create your own track numbersRecording tracks as a single track About track numbers About sampling rate converterDuring playback, press the MENU/CHRG button Useful Features -Checking DisplaysTime of the track Total playing time Whilst in the stop mode, press the MENU/CHRGTrack Level Changing Default Settings Creating disc and track names Titling a MiniDiscTitling a MiniDisc Button to select DiscTo erase a character Characters symbolsWhen the name has been completely entered To enter a spaceTo add characters What is a master MiniDisc?What is a MiniDisc for stamping? Stamping titles from another MiniDisc Before stampingInsert a master MiniDisc Master MiniDisc operationOperation of the MiniDisc for stamping Load a MiniDisc for stamping Press the ENTER/SYNC buttonTo erase one track at a time Editing a Recorded MiniDiscEditing a Recorded MiniDisc To erase all of the tracks at onceTo divide a track To move a track Listening through Listening through Another SystemAnother System Listening through a stereo systemRechargeable battery Other Features and CautionReferences -Other Features and Caution Resuming auto playMiniDisc System Limitations MiniDisc System LimitationsError Messages Error MessagesError MES Meaning Sages No Signal Tr. ProtectMD-MT180HTroubleshooting TroubleshootingMaintenance Troubleshooting/MaintenanceSpecifications SpecificationsOutput level Battery lifeInput sensitivity Sharp Corporation MD-MT180H Portable Minidisc Recorder