Sharp MD-MT180H operation manual Error MES Meaning Sages No Signal, Tr. Protect

Page 39

ERROR MES-	MEANING
SAGES

NO SIGNAL	Poor connection of the digital cable.
	No output signal comes out from the
	connected unit to playback.
	(Use the AC power for the connected
	unit.)
	The input signal has improper sam-
	pling frequency.

PLAY MD	You tried to record on a playback-only
	disc.

PROTECTED	The write protection tab of a MiniDisc
	is set to the protected position.
	You tried to record on a playback-only
	disc.

SORRY	Since a track number is currently be-
	ing located or updated, the unit cannot
	accept your command.
	(Wait for a while and try the operation
	again.)

ERROR MES-		MEANING
SAGES

TEMP OVER	The temperature is too high.
	(Turn off the power, and wait for a while.)

TOC FORM	There is an error in the recording sig-
(**)	nal.
	(Erase all of the tracks, and then record
	again.)

TOC FULL	There is no space left for recording
	character information (track names,
	disc names, etc.).

Tr. Protect	The track has been protected from be-
	ing erased.
	(Edit the track with the device on which it
	was recorded.)

? DISC	A disc which contains data other than
	music was played.
	(A disc which contains nonmusic data
	cannot	be played.)
	There is an error in the signal recorded
	on the disc.

Number or symbol appears in (*) position.

MD-MT180H

ENGLISH

References	Error Messages-
	-

E-38

01/10/5 180H_E_6.fm

Image 39

Contents MD-MT180H Introduction ContentsSpecial AccessoriesOptional Accessories Special NotesReference Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators Main unitDisplay panel Precautions PrecautionsStoring the unit Insert the rechargeable battery Using with the Rechargeable BatteryPower Source -Using with the Rechargeable Battery Charging the rechargeable batteryPower Source -Using with the AC Adaptor Using with the AC AdaptorWith Using with the Alkaline BatteryAlkaline Battery UsingInserting a MiniDisc Inserting a MiniDiscConnections ConnectionsBefore recording Cancel the hold modeRecording Basic Operation -RecordingTo update the recorded contents of the Mini- Disc To interrupt recordingTo stop recording About the TOC Helpful tip when attaching a labelBasic Operation -Playback PlaybackBass control To cancel the hold modeHold Function Basic Operation -Playback/Hold FunctionTo locate the beginning of a track Useful Features -Advanced PlaybackAdvanced Playback To locate the desired portionRandom play or repeat play To play at double speedTo interrupt fast playback To return to normal playbackMonaural recording Long-play recordingStart recording Press the MENU/CHRG button repeatedly to seUseful -Advanced About the recording modeIndication Recording mode RecordingBegin playback on the stereo system Useful Features -Advanced RecordingPlayback sound-actuated recording Press the ENTER/SYNC button againTo start recording from the middle of a track To create your own track numbers Recording tracks as a single trackNumbering restriction About sampling rate converter About track numbersWhilst in the stop mode, press the MENU/CHRG Useful Features -Checking DisplaysTime of the track Total playing time During playback, press the MENU/CHRG buttonTrack Level Changing Default Settings Button to select Disc Titling a MiniDiscTitling a MiniDisc Creating disc and track namesTo enter a space Characters symbolsWhen the name has been completely entered To erase a characterStamping titles from another MiniDisc Before stamping What is a master MiniDisc?What is a MiniDisc for stamping? To add charactersLoad a MiniDisc for stamping Press the ENTER/SYNC button Master MiniDisc operationOperation of the MiniDisc for stamping Insert a master MiniDiscTo erase all of the tracks at once Editing a Recorded MiniDiscEditing a Recorded MiniDisc To erase one track at a timeTo divide a track To move a track Listening through a stereo system Listening through Another SystemAnother System Listening throughResuming auto play Other Features and CautionReferences -Other Features and Caution Rechargeable batteryMiniDisc System Limitations MiniDisc System LimitationsError Messages Error MessagesTr. Protect Error MES Meaning Sages No SignalTroubleshooting MD-MT180HTroubleshootingTroubleshooting/Maintenance MaintenanceSpecifications SpecificationsBattery life Input sensitivityOutput level Sharp Corporation MD-MT180H Portable Minidisc Recorder