O r g a n i z e r
2.Enter the time (in hh:mm:ss format), and select OK.
3.Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear in the standby mode when the countdown timer is running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its lights. If you are in standby mode, select Restart or Exit. If you are not in the standby mode, press any key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select Exit or press the end key to clear the timer note.
To change the time:
1.Select Menu > Organizer > Timer > Change time.
2.Enter the new time, and select OK.
3.Leave the note as it was, or enter a new note, and select Start.
To stop the timer before the alarm sounds, select Menu > Organizer > Timer > Stop timer.
Interval timer
The interval timer in your device allows you to store multiple interval timers. You can define and store up to 10 timing periods for each interval timer. Once at least one interval timer is set and stored, you can select the interval timer and one of the stored intervals for that timer. When the selected interval expires, your phone sounds an alarm, vibrates, and flashes its lights.
To set an interval timer, do the following:
1.Select Menu > Organizer > Timer > Interval timer.
2.Select Add new timer. This option only appears if you have already created an interval timer.
3.Enter a name for the timer, and select Save.
4.Enter a name for the first timer period, and select Save.
5.Enter the desired time interval, and select OK.
6.Select an existing stored period and Edit period, Add period, Delete period, or Start timer.
To use an interval timer:
90