Nokia 282 ‘Waits’ for you to press Send again, then sends the numbers, 18005551212w1234p3434

•‘Waits’ for you to press SEND again. When you do, the phone sends the numbers 1234.

•‘Waits’ for you to press SEND again, then sends the numbers 3434.

The following example shows storing ‘pause’ characters as well as ‘wait’ characters (Note that a ‘wait’ character must still be included, as shown, to separate the phone number from the following digits):

18005551212w1234p3434

When you recall this number from the Phone Book and press SEND, the phone:

•Dials 18005551212 (the phone number), then

•‘Waits’ for you to press SEND again. When you do, the phone sends the numbers 1234. It then:

•Pauses for 2.5 seconds, then sends the numbers 3434.

Note: If the keypad tones have been set to Off, the Touch Tones will still be sent, but you will not hear them.

Pressing MENU SEND sends a displayed number as a Touch Tone.

To end the call, press END after the phone sends the Touch Tones and has returned to the normal call mode.

Using the Flash function

Your cellular system may offer a flash function service. This system service lets you accept or make a second call when you already have a call in progress (e.g. set up a conference call), or send other information to the network, such as credit card numbers.

61

Data and Touch Tones