Nokia 282 owner manual Call Waiting, To answer the waiting call, Press CLR

Note: If the last seven digits of an incoming caller’s number match the last seven digits of a number stored in the Phone Book, the phone displays the stored number/name even if the area code or other dialing prefix is different.

The number is then stored in either the Received Calls list or the Missed Calls list, depending on whether you answer the call or not.

Call Waiting

Call Waiting lets you know you have an incoming call while you already have a call in progress.

When this happens, Calling Line Identification works as in a normal call; either the caller’s name is displayed or not, depending on the network.

To answer the waiting call:

JOHN

CALLING

1When you get an incoming call alert (e.g., if you hear a beep, or see the caller’s number or name, with CALLING flashing), press SEND.

This answers the second call and puts the first call on hold.

2To swap between the two calls, press SEND. To end the both calls, press END.

If you don’t answer the incoming call, after approximately 20 seconds the call alert indicators will stop and the caller’s number (if available) will be added to the Missed Calls list.

If you have a headset connected, press SEND to answer an incoming call or to swap calls. If you press the headset button when a second call comes in, you’ll end the first call.

To ignore the waiting call without answering it:

•Press CLR.

64

Network Services