Viewing the Display Screen
This list identifies the symbols you’ll see on your display screen.
shows your current signal strength. The more lines you have, the stronger your signal.
means your phone cannot find a signal.
tells you a call is in progress.
indicates the 1X services are available.
indicates the 1X Services are not available.
indicates 1X service is connected, but voice calls can be sent or received.
indicates 1X service access is active.
indicates you have text messages waiting.
indicates you have voicemail messages waiting. Press and
hold 
to call your voicemail box.
indicates you have text messages and voicemail messages waiting.
indicates you are roaming on digital service network.
indicates you are roaming on analogue service network.
indicates your phone is on analogue service network.
shows the level of your battery charge. The more black you see, the more power you have left. It turns 
while charging.
indicates you have menus to scroll (in four directions).
indicates the vibrate feature is set to ON.
indicates volume level 4 and vibrate feature is set to ON.
indicates the Location Service of your phone is enabled.
indicates the Location Service of your phone is disabled.
indicates you have new caller’s message.
indicates the Screen Call Auto setting is ON.
indicates you have new downloaded data.
Turning Your Phone ON and OFF
Turning Your Phone ON
To turn your phone on, press 
.
Once your phone is ON, it displays “Looking for service...” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode. At this point, you are ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for PCS Service by pressing any key (when your phone is turned ON).
Tip: The Power Save feature helps to save your battery power when you are in an area where there is no signal.
Turning Your Phone OFF
Press 
for two seconds until you see the powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is charging).
4 | 5 |