3Additional Server Installation Options
The following steps provide setup instructions for a configuration with three computers:
Server 1
Server 2
Arbiter server
To configure and set up a database mirror system
1.On server 1, server 2, and the Arbiter server, install the database engine that comes with Nokia Intellisync Wireless Email.
DB
Server 1
NIMS | Arbiter |
DB
Server 2
2.After installing the database engine, confirm that the database is no longer running on server 1, server 2, and the Arbiter server.
3.Install Nokia Intellisync Wireless Email on the server.
4.Stop all services on the Nokia Intellisync server.
5.To ensure the exact state of the database on server 1 and server 2, copy /opt/ims/db/data/SyncDB.* from the Nokia Intellisync server to server 1 and server 2 in the folder /opt/ims/db/data/.
6.After copying the files, check server 1 and server 2 to ensure that each folder contains the SyncDB.db and SyncDB.log files.
7.Start the Arbiter server using the following bash script.
#!/bin/bash
source /opt/ims/conf/ims_profile
source /opt/ims/db/linux/bin/sa_config.sh
dbsrv10
30 | Nokia Intellisync Wireless Email Linux Installation Guide |