Nokia 6190 Choosing a calling card to use, Making calling card calls, Change access codes

Choosing a calling card to use

1)Press 0HQX 4 1 5 (6HWWLQJV - &DOO VHWWLQJV - &DOOLQJ FDUG)

(For details on how to work the Menu, see page 13)

2)Press W or V to reach desired card, press 2SWLRQV

3)6HOHFW is highlighted; press 2.

4)Enter security code at 6HFXULW\ FRGH=, press 2.

Making calling card calls

1)Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.

2)Press and hold ófor a few seconds until your phone displays &DUG FDOO

3)Your phone will display 3UHVV 2. WR VHQG SKRQH QXPEHU. Wait for the tone, then press 2..

4)Your phone will display 3UHVV 2. WR VHQG FDUG QXP0 EHU. Wait for the tone, then press 2..

Note: Steps 3 and 4 may be switched depending on the dialing sequence you chose.

This procedure may not apply to all calling card options pro- grammed into your phone. Please look at the back of your calling card or contact your long distance company for more information.

Change access codes

See “Access codes” on page 18.

Change module code

See “Change module code” on page 85.

Clear call lists

This feature will clear all dialed numbers, as well as numbers of answered calls and missed calls. You cannot undo this operation, so be careful.

35