Nokia 6235 manual Enhancement settings, Handsfree operation with voice commands

Handsfree operation with voice commands

You can set as many as five voice commands, which allow handsfree operation of certain features in your device.

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device function.

1.In the standby mode, select Menu > Settings > Voice commands.

2.Select the device function you wish to tag: Profiles, Voice mailbox, Radio, Infrared, Voice recorder or Call register.

3.If necessary, select Add for the chosen option associated with that function.

4.Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording

The device replays and saves the recorded tag. The icon appears next to commands that have voice tags assigned.

S e t t i n g s

Activate a voice command

After you have associated a voice tag with a function in your device, you can issue a command by speaking the voice tag.

1.In the standby mode, press and hold the Right selection key.

2.When Speak now displays, pronounce the voice tag clearly into the microphone.

Select Playback to listen to the voice command tag.

When the device finds the voice tag, Found: displays, and the device plays the recognised voice tag through the earpiece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can select one of the following options:

Change — Change the voice command.

Delete — Erase the voice command tag.

■Enhancement settings

The enhancement settings menu is shown only if the device has been connected to a compatible enhancement. In the standby mode, select Menu > Settings > Enhancement settings > Headset, Handsfree, Loopset, Text phone or Charger.

Copyright © 2005 Nokia. All rights reserved. 55