6131.ENv1_NFC_9203947_UG.fm Page 18 Tuesday, May 15, 2007 2:52 PM
1-touch dialing
Assign a phone number to one of the
p.41. Call the number in either of the following ways:
• Press a
•If
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list of the phone. A voice command is added automatically to all entries in the contact list of the phone.
If an application is sending or receiving data using a packet data connection, end the application before you use voice dialing.
Voice commands are
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.
1.In the standby mode, press and hold the right selection key or press and hold the volume down key. A short tone is played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the headset key to start the voice dialing.
2.Say the voice command clearly. If the voice recognition was successful, a list with matches is shown. The phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials the number, or, if the result is not the correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is similar to voice dialing. See Voice commands in ”My shortcuts,” p. 44.
Make a call using NFC
Touch a service tag containing a call request with the NFC detection area. See ”NFC detection,” p. 63. The phone displays the callback number. Select Call to call the number, or Exit to discard. To transmit a call request to a service tag, see ”Transmit to service tags,” p. 64.
■Answer or decline a call
To answer an incoming call, press the call key, or open the phone. To end the call, press the end key or close the phone.
To decline an incoming call if the phone is open, press the end key. To decline an incoming call when the phone is closed, press and hold a volume key.
18