Settings for Profiles
Incoming Call Alert
This setting defines how the phone will notify you about an incoming voice call. The options available are: Ringing, Ascending, Ring once, Beep Once, Caller Groups and Off.
Caller Groups (Network must support CLI)
The phone will ring only when calls are re- ceived from phone numbers which belong to the selected caller group. (Also a graphic is shown, if specified to the group.)
Scroll to the desired group and press Mark to select or Unmark to deselect it. Repeat this as many times as necessary. Next, press Back and then Yes to save or No to discard the changes. See also chapter 4 ‘Phone Book‘, ‘Caller Groups’.
Ringing Tone
Sets the ringing tone for voice calls.
Ringing Volume
Sets the volume level for the ringing, message and alarm clock alert tones.
Vibrating Alert (With optional battery BMS- 2V)
Sets the phone to vibrate when a voice call is re- ceived. The vibrator does not operate when the phone is connected to a charger, deskstand or handsfree car kit.
Message Alert Tone
Sets the ringing tone for text messages.
Keypad Tones
Sets the volume level for keypad tones.
Warning and Game Tones
Sets the phone to sound a warning tone, for ex- ample when the battery is running out of power or when you play one of the games offered by your phone. This setting has no effect on the tones which are related to network services.
Automatic Answer (in Car and Headset Profile Only)
Sets the phone to answer an incoming voice call after a single ring. This function can be used when the car kit is equipped with ignition sense and ignition is switched on. Scroll to On or Off and press OK.
Lights (in Car Profile Only)
Sets the display and keypad lights. Scroll with or to On (always on) or Automatic (on
for 15 seconds after key press or incoming call alert) and press OK.
NOTE: While in Phone Book or the menu functions, you can switch on the lights
for 15 seconds by pressing quickly even if ‘Automatic’ is selected.
Renaming Profiles
This function allows you to edit the name of the selected profile.
1When the desired Profile is highlighted, press
Options.
2Scroll with or to Rename and press
OK.
3Enter the new name and press OK.
NOTE: This function is not available in the General, Headset and Car profiles.
34 | Copyright © 2004 Nokia. All rights reserved. |