9243644_6155_en_au.fm Page 45 Wednesday, December 28, 2005 11:28 AM
M e d i a
Options
With the radio on, select Options and one of the following:
Switch off—Turn off the radio.
Save
Mono output or Stereo
Loudspeaker or
Set
To set the radio frequency, press * and use the keypad to enter the frequency of a known radio station.
To adjust the radio volume, press the volume up and down keys.
When an application using a browser connection is sending or receiving data, it may interfere with the radio.
When you place or receive a call, the radio automatically mutes. When the call ends, the radio switches back on.
Tune and save a radio channel
You can save a preset station to any one of 20 locations in memory.
1.When the radio is on, select or
to change the radio frequency in 0.1 MHz steps, or select and hold or to start the channel search. Searching stops when a channel is found.
2.To save the channel, select Options > Save channel.
To save the channel to a memory location 1 to 9, press and hold the corresponding number key while the radio is playing. To save the channel in the memory location from 10 to 20, press briefly 1 or 2 and the desired number key 0 to 9.
3.Enter a name for the channel, and select OK.
4.Select an (empty) location to save the channel.
■Recorder
This feature enables you to record pieces of speech or sound with your device and listen to them later. The total available time is 3 minutes with no memos stored. The maximum length of a recording depends on how much memory remains available.
In standby mode, select Menu > Media > Recorder > Record to start the recording or Recordings list to
45