9243644_6155_en_au.fm Page 27 Wednesday, December 28, 2005 11:28 AM
M e s s a g e s
2.When you connect to voice mail and the prerecorded greeting begins, follow the automated instructions to setup voice mail.
Listen to voice messages
After you set up voice mail, in standby mode, press and hold 1; or select Menu > Messages > Voice messages > Listen to voice messages to dial the voice mailbox number. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.
Write down voice mailbox number and process
1.Write down your voice mailbox number.
2.Call and check your voice mail as you normally would.
3.Write down your interaction with the recorded prompts
Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press #.
Automate voice mail
You can insert special characters called dialling codes into phone numbers such as voice mail, and save the number to a speed dials location. Dialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. See “Phone numbers with dialling codes”, p. 27.
Voice mail services vary by network operator. The following instructions are examples of common operations. Please check with your network operator for specific instructions on using your voice mail service.
Phone numbers with dialling codes
Dialling codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialling string. To set up dialling codes, do the following:
1.In standby mode, select Menu > Contacts > speed dials.
2.Scroll to an (empty) speed dials slot, and select Assign.
3.Enter your mailbox phone number, including the area code.
Note: If the standard Telecom New Zealand mailbox number 083210 is used, the area code is not necessary..
27