Asus Using the ASUS Q-Connector for Easy Front Panel Cable Management

ASUS Q-Connector (system panel)

You can use the ASUS Q-Connector to connect/disconnect chassis front panel cables in a few steps. Refer to the following instructions to install the ASUS

Q-Connector.

1.Connect the front panel cables to the ASUS Q-Connector.

Refer to the labels on the Q-Connector to know the detailed pin definitions, and then match them to the respective front panel cable labels.

The labels on the front panel cables may vary depending on chassis model.

2.Install the ASUS Q-Connector to the system panel connector, making sure the orientation matches the labels on the motherboard.

3.The front panel functions are now enabled.

The figure shows the

Q-Connector properly installed on the motherboard.

1-36

P5Q-EM DO.indb 36

Chapter 1: Product introduction

12/9/08 12:34:57 PM