Asus P5Q-EM DO manual Installing a Dimm, Removing a Dimm

1.7.3Installing a DIMM

Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components.

1.Press the retaining clips outward to unlock a DDR2 DIMM socket.

2.Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket.

2

DDR2 DIMM notch

1

1

Unlocked retaining clip

A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.

3.Firmly insert the DIMM into the socket until the retaining clips snap back in place and the DIMM is properly seated.

1.7.4Removing a DIMM

To remove a DIMM:

1.Simultaneously press the retaining clips outward to unlock the DIMM.

Support the DIMM lightly with your fingers when pressing the

retaining clips. The DIMM might 1 get damaged when it flips out with extra force.

3

Locked retaining clip

2

1

DDR2 DIMM notch

2.Remove the DIMM from the socket.

ASUS P5Q-EM DO 1-19

P5Q-EM DO.indb 19

12/9/08 12:34:00 PM