2.6.5APM Configuration
BIOS SETUP UTILITY
Power
APM Configuration
Restore on AC Power Loss | [Power Off] |
Power On By RTC Alarm | [Disabled] |
Power On By External Modems | [Disabled] |
Power On By PCI Devices | [Disabled] |
Power On By PCIE Devices | [Disabled] |
Power On By PS/2 Keyboard | [Disabled] |
Power On By PS/2 Mouse | [Disabled] |
GBE Lan Power | [Enabled] |
<Enter> to select whether or not to restart the system after AC power loss.
Restore on AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system goes on after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss. Configuration options: [Power Off] [Power On] [Last State].
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to [Enabled], the items RTC Alarm Date / RTC Alarm Hour / RTC Alarm Minute / RTC Alarm Second will become
Configuration options: [Disabled] [Enabled].
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in
The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on.
Power On By PCI Devices [Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI devices. Configuration options: [Disabled] [Enabled].
Power On By PCIe Devices [Disabled]
Allows you to enable or disable the PCIe devices to generate a wake event. Configuration options: [Disabled] [Enabled].
Chapter 2: BIOS setup |
12/9/08 12:36:02 PM
