Dialling a number using voice dialling
Note: You must say the name exactly as you said it when you recorded it.
1.In standby mode, press and hold the right softkey (Contacts or Go to) for two seconds.
A tone is heard and Speak now is displayed.
2.After the tone, clearly speak the voice tag that you recorded previously into the microphone.
Note: If the voice tag is not recognized by the phone or if you fail to speak a tag within three seconds after the tone, the message Name not found is displayed, and you are returned to the standby mode.
3.When the voice tag is recognized:
-The phone book entry will be displayed for three seconds.
-The voice tag is replayed (through the ear piece).
-After three seconds, the number is dialled.
The only other option for initiating voice dialling is to press the headset button momentarily while in standby mode. The alert tones play through the headset. Speak the voice tag into the headset microphone.
U s i n g t h e m e n u
The voice tag will playback through the headset to confirm your choice.
For further information on voice dialling and voice commands see Voice on page 29.
■Profiles (Menu 4)
Your phone has
various setting groups, called profiles, for which you can customise the phone tones for different events and environments.
Press Menu, and select Profiles. Scroll to a profile and press Select.
•To activate the selected profile, select Activate.
•To personalise the profile, select Personalise. Select the setting you want to change and make the changes.
•To set the profile to be active for a certain amount of time up to 24 hours, select Timed and set the end time. When the time set for the profile expires, the previous profile that was not timed, becomes active.
Copyright © 2004 Nokia. All rights reserved. | 21 |