Advanced features
3Highlight Activate and press Select.
4Enter the number to which you want your calls forwarded (or press Search to recall a number from the phone book), and press OK.
Your phone calls the network to activate or cancel the feature you have requested. The network sends a confirmation when the feature is activated or cancelled successfully.
•CALL WAITING
This network service lets you receive an incoming call when you are already in a call. When you receive an incoming call, your phone displays the caller’s phone number (or the caller’s entry in your phone book). The phone also beeps, notifying you of the incoming call.
To answer call waiting, press the Send key or Answer to place the current active call on hold and automatically answer the new call.
To switch between two calls, accepting the waiting call puts the first caller on hold. To put the second caller on hold and reconnect with the first caller, press the Send key.
To end an active call, simply allow the other party to hang up; the call on hold then becomes the active call.
•CONFERENCE CALLING
This feature allows you to talk to two people at the same time. Conference calling is a
Note: Check with your service provider to make sure this service is available in your network.
1Make a call to the first participant as usual.
2When you are ready to place a call to the next party, press Options > New call.
3Enter the number and press the Send key.
OR
Press Search to recall the number from the phone book.
4Press the Send key again to connect both parties.
5To end the call, press the End key. This action disconnects both parties.
End calls
To end a conference call, that is, to disconnect with all callers, press the End key, or press Options > End all calls.
Disconnect one party
If you wish to disconnect with the first party and remain connected to the second party, have the first party terminate the call on his/her end.
[ 45 ]