4Enter the second number.
Repeat steps 3 as many times as necessary.
A subtotal is shown after you enter the next operand (+,
5For a total, press Options twice.
6To start a new calculation, press and hold Clear for 2 seconds.
Note: This calculator has limited accuracy and rounding errors may occur, especially in long divisions.
•STOPWATCH
You can use your phone Stopwatch feature to time an event in hours, minutes and seconds. The event time can be saved, viewed, or deleted.
Warning! Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.
Important: Using the stopwatch consumes the battery and the operating time of the phone will be reduced. Be careful not to let it run in the background when performing other operations with your phone.
Split timing
The split time function allows you to measure the total time for an event, yet allows you to capture the elapsed time at various intervals. To measure split time:
From the Organizer menu, select Stopwatch > Split timing > Start.
The elapsed time appears on the display.
Once the split timer has started, the following options are available:
•Press Split to display the split time while the timer continues to display elapsed time.
•Press Stop to stop the timer and view the total elapsed time.
If you continue pressing Split, the most recent split time appears at the top of the list of split times. You can scroll to review previous times.
Timing options
Once you have stopped timing an event (using lap or split), you have the option to save the information, reset the stopwatch, or continue timing (split timing only).
While stopwatch is running, press Stop > Options and select one of the following:
•Save saves the current timing data. Enter a name, and press OK.
•Reset clears the current timing data and resets the timer.
•Start restarts the split timer from the point the timer was stopped.
[ 62 ]