| Advanced calling features | |
|
|
|
Character | Action |
|
|
|
|
p | Creates a pause when a number is dialed. The numbers you |
|
enter after this special character are automatically sent as |
| |
| touch tones after a |
|
|
|
|
w | Creates a wait when a number is dialed. This means that |
|
your phone waits for you to press the left selection key |
| |
| before it sends the number as touch tones. |
|
|
|
|
* | Sends command strings to the network. Contact your |
|
service provider for details. |
| |
|
| |
|
|
|
+ | Use this character to link a |
|
number in the contact list. |
| |
|
| |
|
|
|
Set manual touch tones
1Press Menu
2Select one of the following options, then press Select: Continuous: Sounds tone for as long as you press and hold a key.
Fixed: Sets the tone length to 0.1 second, regardless of how long you press a key.
Off: Turns off the tones. No tones are sent.
Set touch tone length
You can also set the length of each touch tone.
1Press Menu
2Use the Scroll up or Scroll down key to scroll to Short or Long.
Short sets the tone length to 0.1 second. Long sets the tone length to 0.5 second.
3Press Select.
Store touch tone strings
You can store touch tone strings the same way that you store names and numbers in your contact list. You can store an entire sequence of digits and send it as touch tones for frequently used strings of numbers.
Nokia 2220/2260 User Guide | 61 | Copyright © 2003 Nokia |