STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1Enter the phone number that you want associated with a touch tone.
2Enter the touch tone character where needed (p, w, or *).
3Enter the touch tone string.
4Store the number as you normally would.
SEND A TOUCH TONE STRING
1Press Menu
2Make sure that the setting is not set to Off.
If not set to Off., scroll to one of the other options and press Select.
3During your call, press Options, scroll to Touch tones, and press Select.
4Enter the touch tone string or recall the string from the contact list, then press OK.
If you send touch tones while in the analog mode, be careful not to send confidential information.
• LINK CONTACT LIST ENTRIES
This feature allows you to store a phone number in one contact list location and link it to another contact list entry.
For example, linking the phone number of an automated service (for example, automated banking service) with a touch tone string entry in your contact list (example: account and PIN numbers) automatically recalls and sends the touch tone string when you call the service.
USE LINKING OPTIONS
1Store the touch tone string into your contact list.
2Assign the contact list entry with the touch tones to a
For more information on
3Edit the automated service’s phone number by adding +n to the end of the phone number (where n is the
Example:
4Press OK to save your changes.
5Dial the automated service number from your contact list.
Your phone automatically sends the touch tones when the call connects.
62 | Copyright © 2003 Nokia |