Nokia RM-10 manual Retrieval settings, Settings for sent e-mail

Messages

50

selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.

• Security (ports) — Select the security option used to increase the security of the connection.

• Port — Define a port for connection.

• APOP secure login (for POP3 only) — Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.

Settings for sent e-mail

Select Outgoing e-mailand from the following settings:

•My e-mail address — Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.

•User name — Enter the user name for the e-mail service.

•Password — Enter the password for the e-mail service.

•Outgoing mail serv. — Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.

•Access point in use — Select the Internet access point that the device uses for sending the e-mail messages that you send.

•Security (ports) — Select the security option used to secure the connection to the remote mailbox.

•Port — Define a port for connection.

User settings

Select User settings and from the following settings:

•My name — Enter a name to appear before your e- mail address when you send e-mail.

•Reply-to— Select whether you want replies to be redirected to a different address. Select On, and enter the e-mail address to which you want to direct the replies. You can only enter one address to which replies are directed.

•Delete e-mails from — Select whether you want to delete the e-mails only from the device or from both the device and the server. Select Always ask if you want to confirm from where the e-mail should be deleted every time you delete an e-mail.

•Send message — Select to send the e-mail as soon as possible, to send it the next time you retrieve e- mail, or to store the e-mail in the Outbox, from where you can send it later.

•Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address in the settings for Outgoing e-mail.

•Include signature — Select whether you want to attach a signature to your e-mail messages.

•New e-mail alerts — Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox.

•Default encoding — Select the preferred method for character encoding.

Retrieval settings

Select Retrieval settings and from the following settings: