Nokia RM-10 manual Call settings, Display settings, Select Call and from the following

•Navigation key right, Navigation key left, Navigat. key down, Navigation key up, Selection

key — Change the shortcuts that open when you scroll to different directions. These settings are not available if you select Active standby > On.

Display settings

Select Display and from the following:

•Light sensor — Adjust the amount of light required to illuminate the device display.

•Power saver time-out— Select the amount of time before the screen saver is activated. Activating the screen saver lengthens the device operating time.

•Light time-out— Set how quickly after last keypress the display dims.

Call settings

Select Call and from the following:

•Send my caller ID — Select Yes to display your phone number to the person you are calling or Set by network to let the network to determine whether your caller ID is sent.

•Send my net call ID — Set this feature on if you want to display your net caller ID to the person you are calling.

•Call waiting — Select Activate to be notified of a new incoming call while you have a call in progress or Check status to check if the function is active on the network.

•Internet call waiting — Activate this feature to be notified of a new incoming call while you have a net call in progress.

•Internet call alert — Set this on if you want the device to respond to the caller that it is busy. If you set this off, the device emits a busy tone to the caller and you receive a notification about the missed call.

•Default call type — Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address.

•Reject call with SMS — Select Yes to send a text message automatically to the person who is calling you informing why you cannot answer their incoming call.

•Message text — Enter the text that is sent when you cannot answer an incoming call and want to automatically send a text message as a reply.

•Image in video call — Select Use selected to select a still image to be displayed instead of a video during a video call or None to not send any image during a video call.

•Automatic redial — Select On to redial a number if it was busy at the first call attempt. Your device makes a maximum of 10 attempts to connect the call.

•Summary after call — Select On to briefly display the approximate duration of the last call.

•Speed dialling — Select On to activate speed dialing on your device. To dial a phone number assigned to the speed dialing keys (2-9), press and hold the key. See "Speed dial," p. 26.

•Anykey answer — Select On to answer an incoming call by briefly pressing any key, except the end key.

•Line in use — Select Line 1 or Line 2 to change the phone line for outgoing calls and text messages

Settings

87