Official Manual for Boss Audio Replacement Parts

To engineers in charge of repair or inspection of our products.

Before repair or inspection, make sure to follow the instructions so that customers and Engineers in charge of repair or inspection can avoid suffering any risk or injury.

1. Use specified parts.

The system uses parts with special safety features against fire and voltage. Use only parts with equivalent characteristics when replacing them. The use of unspecified parts shall be regarded as remodeling for which we shall not be liable. The onus of product liability (PL) shall not be our responsibility in cases where an accident or failure is as a result of unspecified parts being used.

2. Place the parts and wiring back in their original positions after replacement or re-wiring. For proper circuit construction, use of insulation tubes, bonding, gaps to PCB, etc, is involved. The wiring connection and routing to the PWB are specially planned using clamps to keep away from heated and high voltage parts. Ensure that they are placed back in their original positions after repair or inspection. If extended damage is caused due to negligence during repair, the legal responsibility shall be with the repairing company.

3.Check for safety after repair. Check that the screws, parts and wires are put back securely in their original position after repair. Ensure for safety reasons there is no possibility of secondary ploblems around the repaired spots. If extended damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company.

4.Caution in removal and making wiring connection to the parts for the automobile. Disconnect the battery terminal after turning the ignition key off. If wrong wiring connections are made with the battery connected, a short circuit and/or fire may occur. If extensive damage is caused due to negligence of repair, the legal responsibility shall be with the repairing company.

5.Cautions regarding chips.

Do not reuse removed chips even when no abnormality is observed in their appearance. Always replace them with new ones. (The chip parts include resistors, capacitors, diodes, transistors, etc). The negative pole of tantalum capacitors is highly susceptible to heat, so use special care when replacing them and check the operation afterwards.

6. Cautions in handling flexible PCB

Before working with a soldering iron, make sure that the iron tip temperature is around 270... Take care not to apply the iron tip repeatedly(more than three times) to the same patterns. Also take care not to apply the tip with force.

7.Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.

- 2 -

CH550 specifications

The Boss Audio Systems CH550 is a standout choice for audio enthusiasts looking to enhance their vehicle's sound system. This powerful amplifier packs a punch with an array of impressive features, technologies, and characteristics that set it apart from the competition.

At the core of the CH550 is its robust design, which allows it to deliver high-quality audio with clarity and precision. This amplifier offers a powerful output of 550 watts, providing ample power to drive your speakers to their full potential. With a compact design, it is easy to install in various vehicle types without taking up too much space, making it suitable for cars, trucks, and even boats.

One of the standout features of the CH550 is its MOSFET power supply, which ensures better efficiency and more stable performance. This technology allows the amplifier to deliver higher levels of power while minimizing distortion, ensuring that every beat and note is reproduced faithfully. The CH550 also incorporates a variable low-pass filter, which allows users to tailor their audio experience further. By adjusting the filter, you can control the frequencies that are sent to the subwoofer, resulting in a smoother overall sound.

Another notable characteristic of the CH550 is its built-in advanced thermal protection, which prevents overheating by automatically shutting down the amplifier when it reaches critical temperatures. This feature ensures the longevity of the amplifier and contributes to its reliability over time. Additionally, the CH550 includes short-circuit and overload protections, providing extra security against potential damage.

The CH550 is designed to be user-friendly, featuring a front-mounted gain control and a bass boost function. This allows users to easily adjust their audio settings on the fly, enhancing bass output or fine-tuning overall sound to suit personal preferences. Furthermore, the amplifier is compatible with a range of audio sources, including smartphones and MP3 players, allowing for versatile connectivity options.

In summary, the Boss Audio Systems CH550 is a powerful and versatile amplifier that offers exceptional performance. With its high wattage output, efficient MOSFET power supply, user-friendly features, and robust protection mechanisms, it delivers a premium audio experience perfect for any vehicle. Whether you are a casual listener or a serious audio enthusiast, the CH550 is designed to elevate your listening experience to new heights.