![](/images/new-backgrounds/1017164/1716455x1.webp)
MZ-G750/R700
60.Press the X key.
(0D65 is blinking)
61.Press the [VOL+] key once to change the blinking portion to 0D75.
This set LCD display
0D7500 | 0 23 |
00: Adjusted value
62.Press the x key.
(00 is blinking)
63.Adjust with the [VOL+] key (adjusted value up) or
This set LCD display
0D751C | 0 23 |
1C: Adjusted value
64.Press the X key.
(0D75 is blinking)
65.Press the [VOL+] key once to change the blinking portion to 0D76.
This set LCD display
0D7600 | 0 23 |
00: Adjusted value
66.Press the x key.
(00 is blinking)
67.Adjust with the [VOL+] key (adjusted value up) or
This set LCD display
0D7603 | 0 23 |
03: Adjusted value
68.Press the X key.
(0D76 is blinking)
69.Press the [VOL+] key to change the blinking portion to 0D78.
This set LCD display |
|
0D7800 | 0 23 |
00: Adjusted value
70.Press the x key.
(00 is blinking)
71.Adjust with the [VOL+] key (adjusted value up) or
This set LCD display
0D7801 | 0 23 |
01: Adjusted value |
|
72.Press the X key.
(0D78 is blinking)
73.Press the [VOL+] key once to change the blinking portion to 0D79.
This set LCD display
0D7900 | 0 23 |
00: Adjusted value
74.Press the x key.
(00 is blinking)
75.Adjust with the [VOL+] key (adjusted value up) or
This set LCD display
0D79E0 | 0 23 |
E0: Adjusted value
76.Press the X key.
(0D79 is blinking)
77.Press the [T MARK] key for several seconds (about 3 seconds) to exit the patch data write mode (to return to the manual mode display in the test mode).
This set LCD display
Patch 01 | 0 23 |
01: Adjusted value
78.Press the X key to write the modified data. (The adjusted value changes to CC)
79.The modified data writing is over, if the adjusted value changes to DD.
This set LCD display
SDD | 0 23 |
DD: Adjusted value
80. Turn the power off.
28