Multiquip pro12 operation manual Startup, Starting the Engine Honda engine

Page 20

startup

CAUTION

DO NOT attempt to operate the mixer until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood.

This section is intended to assist the operator with the initial start-up of the mixer. It is extremely important that this section be read carefully before attempting to use the mixer in the field.

Starting the Engine (HONDA engine)

1.Place the engine fuel valve lever (Figure 11) to the “ON” position.

Figure 11. Engine Fuel Valve Lever (ON

Position)

2.Move the throttle lever (Figure 12) away from the slow position, about 1/3 of the way toward the fast position.

Figure 13. Engine Choke Lever (Closed)

4.Place the choke lever (Figure 14) in the “OPEN” position if starting a warm engine or the temperature is warm.

Figure 14. Engine Choke Lever (Open)

5.Place the engine ON/OFF switch (Figure 15) in the “ON” position.

Figure 15. Engine ON/OFF Switch (ON Position)

6.Pull the Start/Stop Switch, located on the engine cover, outward to start the engine (Figure 16).

START/STOP

SWITCH

Figure 12. Throttle Lever (1/3 Start Position)

3.Place the choke lever (Figure 13) in the “CLOSED” position if starting a cold engine.

PULL OUT

TO START

Figure 16. Start/Stop Switch (Start Position)

page 20 — Pro12 hydraulic mixer • operation manual — rev. #0 (05/06/13)

Image 20
Contents Model PRO12 Proposition 65 warning Silicosis/respiratory warnings Silicosis WarningTable of Contents PRO12 Hydraulic MixerSafety Information SaFety messagesSaFety symBols Symbol Safety Hazardfirst aid kit General saFetyfire extinguisher  do not mix flammable or explosive substances Mixer saFetyEngine saFety Environmental saFety Fuel saFetyTransporting saFety Specifications ModelDimensions Dimension in. mmPower Plants Engine MaintenanceGeneral Information ApplicationMixer components Mixer ComponentsMixer components Hydraulic components Hydraulic ComponentsHydraulic components Basic engine Initial ServicingPaddle blade adjustment Steel DrumInspection Grease Fitting dump cylinder Hydraulic HosesGrease Fittings Bearings Startup Starting the Engine Honda engineStopping the Engine Normal Shutdown Emergency ShutdownOperation MixingMaintenance First EveryDaily WeeklyMixer Storage Mixer CleaningHydraulic oil filter Troubleshooting Troubleshooting engineAir cleaner dirty? Clean or replace air cleaner Troubleshooting mixer Symptom Possible Problem SolutionPage Hydraulic system Locator Hydraulic system diagram Hydraulic System DiagramHERE’S HOW to GET Help