- End the current call
Mute or unmute a call
If you select Mute, the microphone will be deactivated.
When you switch from one call to another, muting will be cancelled.
Call recording
During a call, press L Options and select Record to access the 3 recording options; namely, Record both (default), Record the opposite party and Record own (applicable to
>(Phone or Micro SD card) > Sounds.
There is no limit to the length of the recording; the recording will stop only when you press R key to stop the recording, when there is insufficient memory, or when the call has ended.
Adjust speaker/earpiece volume
During a call, call on hold or call waiting, you can press + / - side key to increase or decrease the volume (if you are not browsing the call options menu).
When the volume has been set, the call volume will take effect immediately and the settings will be applied to your subsequent calls.
Make a second call (Network dependent)
You can make a second call by putting the current call on hold:
1.During a call with Party A, you can enter Party B's number using the keypad.
2.Press ( to dial Party B's number. Party A will be put on hold automatically.
Switch calls (Network dependent)
When you have one active call and one call on hold, you can press , Swap to switch between the 2 calls.
Make a Conference Call (Network dependent)
Your phone supports
When on the phone, you can carry out the following operations to establish the
Calling | 13 |