Philips X600 manual Stopwatch, Countdown, Unit converter, Firewall

Stopwatch

Your phone features a stop watch and the minimum unit is 0.1 second.

The starting time is 00:00.0, in the format “mm:ss.n”, where mm stands for minutes of the watch, which can be any number from 0 to 59; ss stands for seconds, a number between 0 and 59; n stands for 0.x second, x being any number from 0 to 9. The stopwatch will start the timing when you press , Start. You can pause the timing, press , Pause, to resume, press , Go, to stop the timing, press R Stop.

Countdown

This feature is very similar to the alarm clock, except that you will be alerted of the remaining time, and the phone will emit an alarm at the end of the count-down. The alarm tone is the same as your alarm clock.

The minimum time is 1 minute. The format of the time is hh:mm:ss, and the maximum time input is 23 hours 59 minutes 59 seconds.

You can edit the time timer and start the countdown by pressing , Start. To stop countdown, press , Pause, to reset, press L

Reset. and you can exit the menu by pressing the R Back.

The count-down timer will switch on automatically and emit an alarm at the end of the count-down even if your phone is in idle mode.

Unit converter

This application allows you to convert many types of units such as exchange rate, area, energy, mass, power, pressure, temperature and volume.

Select the type of unit and input the figure and then press , Change to calculate the result.

Press # key to enter the decimal point.

Firewall

This function provides a simple and quick method for you to avoid nuisance calls and SMS. Blacklist contains a list of phone numbers from which you do not wish to receive calls or SMS.

Select Business > Firewall > Set and choose between the following options:

•Status: Status icon, Event or None.

•Activate: On or Off.

Business 55