Sony MZ-NF810 service manual A n u a l, Configuration of Test Mode, Manual Mode

MZ-NF810/NF810CK

Configuration of Test Mode

[Test Mode $Display Check Mode%]

Press the > or [VOL +] key

[Manual Mode]

Press the		[Servo Adjustment]
	key
xCANCEL/CHG		[Audio Adjustment]
		[Power Supply Adjustment]
		[OP Alignment Adjustment]

Press the	. or [VOL --] key
	[Overall Adjustment Mode]
Press the		[Electrical Offset Adjustment]
xCANCEL/CHG key
		Power Supply Adjustment
		Auto Item Feed
		CD Overall Adjustment/
		MO Overall Adjustment

Press the [GROUP] key

or press the [DISPLAY] key on the remote commander

[Self-Diagnosis Result Display Mode]

Press the xCANCEL/CHG key

Press the	ENTERN	or [REC] key
			[Sound Skip Check Result Display Mode]
Press the				key
	xCANCEL/CHG

Press the [T MARK] key, or [DISPLAY] key on the remote commander for several seconds (about 3 seconds)

[Key Check Mode]

The key check quits, or open the upper panel

Manual Mode

Mode to adjust or check the operation of the set by function. Normally, the adjustment in this mode is not executed. However, the Manual mode is used to clear the memory, power supply adjustment, and laser power check before performing automatic adjustments in the Overall Adjustment mode.

• Transition method in manual mode 1. Set the test mode (see page 13).

2. Press the > or[VOL+] key activates the manual mode

t

where the LCD display as shown below.

Remote commander LCD display

000M a n u a l

3.During each test, the optical pick-up moves outward or in- ward while the >t or .T key is pressed for several seconds respectively.

4.Each test item is assigned with a 3-digit item number;

100th place is a major item, 10th place is a medium item, and unit place is a minor item.

The values adjusted in the test mode are written to the nonvolatile memory (for the items where adjustment was made).

				[VOL +] key: 100th place of item
[Major item switching]						number increase.
				[VOL --]key: 100th place of item
		key			key	number decrease.
	>			xCANCEL/CHG
				[VOL +] key: 10th place of item
[Medium			item switching]			number increase.
				[VOL --]key: 10th place of item
					key	number decrease.
	>	key
				xCANCEL/CHG

[Minor item switching]	> key:Unit place of item number
	increase.
	. key:Unit place of item number
	decrease.

[Adjusted value variation]

[VOL +] key: Increases the adjusted value of the 1st digit

[VOL --]key: Decreases the adjusted value of the 1st digit

[P MODE] key of

the remote commander: Increase the adjusted value of the 2nd digit

[SOUND] key of the remote commander: Decrease the adjusted value of the 2nd digit

[Adjusted value write]

Xkey on the set or

key on the remote commander :

When adjusted value is changed:

Adjusted value is written.

When adjusted value is not changed:

That item is adjusted automatically.

14