Philips manual Basic operations of your SE735, Stand-by mode

InstallEN

3.Press mSELECT to enter Set Date/Time.

4.Enter current time (HH:MM) and current date (DD/MM/YY) and press mOK.

WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.

Now, you are ready to use your phone.

Basic operations of your SE735

Make a call

Enter the phone number (maximum 20 digits) and press rto dial the number.

For details, please refer to "Make a call" on page 21.

Answer or end a call

Press rkey to answer a call.

Press ekey to end a call.

For details, please refer to "Answer a call" on page 21 and "End a call" on page 22.

Switch the handset on/off

Press and holdekey for 3 seconds to switch off the handset in stand-by mode.

Short press ekey to switch on the handset again.j

Keypad lock/unlock

Press and hold *key for 2 seconds to lock or unlock the keypad in stand-by mode.

Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

Short press c key on the base. The handset starts to ring. Once retrieved, press any key on the handset to end the paging.

Stand-by mode

If the handset is not used for 30 seconds in settings mode, review mode, edit mode, etc. it will automatically return to stand-by mode. It will also return to stand-by mode automatically when the handset is placed back on the base station.

15