Philips CT9A9R manual Basic steps of Stroke input are as follows Enter strokes, Clear to clear

The basic steps of Stroke input are as follows:

1.	Enter strokes	2 to 9
		(excluding 3 and 7)
		c Clear to clear.
2.	Select from	< or > / + or -
	candidate list	( scroll list)
3.	Confirm selection	,

4.Select and enter association character, or return to step 1 to enter new strokes.

5.Or press c Back to exit from association character input mode, then press , to complete the editing.

The principle of stroke input is to dissect and separate every stroke of a chinese character according to sequence. When you wish to input the character, press the keys corresponding to the required strokes according to sequence to get the desired character. The stroke input method in this phone classify a chinese character into 5 basic strokes: (horizontal, vertical, left falling stroke, right falling stroke and over-down) as well as a special stroke. When the stroke you need does not correspond to the 5

basic strokes, replace it with the special stroke. The examples below will give you a clearer understanding of how to use stroke input method:

1.木 : 2 + 5 + 4 + 6

2. 田 : 5 + 8 + 2 + 5 + 2 + >

3.加 : 9 + 4 + 5 + 8 + 2

4.	凉 : 6 + 9 + 6 + 2 + 5
	+ 8 + 2 + 9 + 4 +
	6
5.	陈 : 9 + 5 + 2 + 9 + 9

+4 + 6

Generally, you will be able to find a desired character before you finished entering all the strokes. After you have entered the name of the phonebook or SMS, press cBack to exit from association character list and press , to confirm completion of text editing.

The input mode for Traditional chinese stroke and Simplified Chinese stroke are similar, with the exception of the character coding.

Text and number entry 21