When the handset is fully charged, is displayed.
3.4Configure your phone
Depending on your country, the WELCOME screen may not appear. In that case, you do not need to select the country code to configure your phone.
Before using your phone, you need to configure it according to the country of use. After charging it for a few minutes, the WELCOME screen appears. Follow these steps to configure your phone :
Press to display the list of countries
•Available country will display on the screen.
Note
If is pressed, the handset will show the WELCOME screen again.
Press / to scroll to your country
Press to confirm your selection
•Your phone is configured according to your selected country and back to idle screen.
Note
Once the country is selected, the default line settings for the selected country will be applied to your phone automatically.
Tip
If you chose the country in use wrongly or would like to change the country after the first
configuration, you can press in idle mode to enter into the main menu, then input ##**793 to reset to default settings. After around 30 seconds, your phone will go back to WELCOME screen for you to select the country again.
3.5How to power off or on the handset power
You can power off your handset in order to save battery power.
Press and hold for about five seconds to power off the handset
Press to power on the handset again
4 Using your phone
4.1Make a call
4.1.1Predialling
Enter the phone number (maximum 24 digits)
Press to dial the number
•The call is initiated.
4.1.2Direct dialing
Press to take the line
Enter the phone number
•The call is initiated.
4.1.3Call from the call log
This feature is available if you have subscribed the Caller Line Identification service (CLI) with your network provider.
In idle mode :
Press to select CALL LIST Press
Press / to scroll to your desired unanswered call
Note
The screen can either display :
•the caller's number*
•the caller's name (if matched with the phonebook)*
•UNAVAILABLE if it is an unidentified call**
•Availability of time and date information
depends on the service providers.
*Subject to a subscription of CLI with your operator
**Unlisted numbers, withheld caller identification.
Press to dial the number
•The call is initiated.
Note
The latest unanswered call will display first and the oldest entry will be deleted when the memory is full.
Using your phone | 11 |