Philips CD440 Telephone connection, Safety precautions, Warranty, Conformity Environmental care

Page 7

unplugging the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

1.4Telephone connection

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard UL 60950). Following a power cut, the call in progress is lost.

1.5Safety precautions

Do not allow the handset to come into contact with liquids or moisture.

Do not open the handset, base station or charger. This could expose you to high voltages.

Do not allow the charging contacts of the charger or the battery to come into contact with extraneous conductive materials.

There is a slight chance that the telephone could be damaged by an electrical storm. It is recommended that users unplug the phone from the USB socket and the phone line from the phone wall socket during a storm.

Do not use the handset in an explosive hazard area such as where there is gas leaking.

Young children should be supervised to ensure that they do not play with the telephone.

Because the phone works by sending radio signals between the base unit and the handset, wearers of hearing aids may experience interference in the form of a humming noise.

We advise that this phone should not be used near intensive care medical equipment or by persons with pacemakers.

Your phone can interfere with electrical equipment such as answering machines,TV and radio sets if placed too close.

It is recommended that you position the base unit at least one meter from such appliances.

!Warning

Use only the mains adapter supplied with this telephone. Incorrect adapter polarity or voltage can seriously damage the unit.

!Warning

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. Never use non-rechargeable batteries; use recommended type supplied with this telephone. NiMH batteries must be disposed of in accordance with the applicable waste disposal regulations.

FCC CERTIFICATION NUMBER IS LOCATED ON THE CABINET BOTTOM

The term „IC:“ before the certification number signifies that Industry Canada technical specifications were met. This certification means that the equipment meets certain radio communications and operational requirements.

1.6Warranty

This Class B digital apparatus complies with Canadian ICES-003.

The warranty informations are available on www.p4c.philips.com.

1.7Conformity

The Declaration of conformity is available on www.p4c.philips.com.

1.8Environmental care

Please remember to observe the local

regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and, where possible, promote their recycling.

Philips has marked the packaging with standard symbols designed to promote the recycling and appropriate disposal of your eventual waste.

A financial contribution has been paid to the associated national recovery & recycling system.

The labeled packaging material is recyclable.

Important Safety Instructions

5

Image 7
Contents Page Page Table of contents How to set conference mode on/off Important Safety Instructions Battery requirements Causing serious damage to the productSafety information Power requirementsConformity Environmental care Safety precautionsWarranty Telephone connectionWhat’s in the box Your phoneLine cord DCall log/Up key Overview of the phone Handset Event LEDMenu/OK key Redial/Mute/Next keyHash key Talk off/Exit keyGTalk on/R key HAlphanumeric keypadBase station Handset locator key Display icons on the handsetConnect the base station Caution Getting startedPlace the handset on the charging cradle Using your phone Answer a call in handsfree mode When the phone rings, press Call from the phonebook Idle modeCall from the redial list Idle mode Call timerInit 2NDCALL Electric, Magnetic and Electromagnetic Fields EMF How to find a handsetDuring the conference call Call waitingUse more of your phone Transfer EntryCall log How to save call log entry to phonebook Idle modeHow to delete the call log entry Idle mode How to delete the entire call log Idle modeALL Group C ToneMelody TIME/DATEContrast SETOFF RingMode HANG-UPLanguage BacklightBabycall NR NumberNumber 1, Number 2, Number 3, Number CallPIN Returns to idle modeRegistration UnregisterCountry PrefixMail Activate SettingsDefault settings Table below describes the menu tree of your phone Menu structureList of Available Countries Rechargeable Batteries Frequently asked questionsNoise interference on your radio or television Caller Line Identification CLI service does not workHandset does not ring Caller does not hear meIndex Unmute Unregister 23 Voice mail 16 Warranty Rights of the Phone Company FCC and IC statementsEquipment approval Information Notification to the local telephone companyPrivacy NoiseFCC RF Radiation Exposure Statement Hearing Aid Compatibility HACDo not attempt to repair or modify this equipment Service Centers USA and CanadaRbrc seal Radio Equipment
Related manuals
Manual 6 pages 51.92 Kb