Philips DS1400 user manual Get started, Connect power, Turn on, Switch to standby mode

Page 6

3 Get started

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the bottom of the apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Connect power

Caution

•• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit.

•• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord.

Note

•• Before connecting the AC adaptor, make sure that you have completed all other connections.

Turn on

In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone.

Switch to standby mode

The unit switches to standby mode if there is no audio signal from docked iPod/iPhone over 15 minutes.

4EN

Image 6
Contents Always there to help you Page Contents Safety Important Safety InstructionsIntroduction Whats in the boxOverview of the main unit Get started Connect powerSwitch to standby mode Turn onPlay Adjust volumeAdjust brightness Play from iPod/iPhoneAmplifier SpecificationsProduct information General informationTroubleshooting Environmental information All rights reserved DS140005UMV1.0