Philips 535 manual Change name

GSM settings

be stored automatically. Please contact your network operator for detailed information on this subject.

Change name

Allows you to enter or change the name

of the selected profile. Press ,, enter Change name the name of your choice and press ,

to confirm.

Some pre-configured profiles might be locked, prevent- ing re-programming and renaming.

Show

Allows you to visualise all parameters of the selected profile (ISP number, APN,

Show	etc.), either GSM or GPRS.
GSM settings

Allows you to enter or change the GSM settings and gives you access to the fol- lowing items:

Login and Password allow you to enter the login and password needed. In both cases, enter the information and press ,to confirm.

Phone Number allows you to enter the phone number needed to establish a connection. Select Phone numbers and press ,, then press +or -to select:

-ISDN No. to enter an ISDN ISP number, OR

-Analogic No. to enter an analogic number.

In both cases, enter the «+» sign followed by the number provided by your operator and press ,.

Contact your operator to know what type of number you should select.

Inactivity time allows you to enter an inactivity time pe- riod after which the phone automatically disconnects (if a connection was in progress) and returns to idle screen. Select Inactivity time and press ,, then enter a value (in seconds) of over 30 s. and press ,.

GPRS settings

This allows you to change the GPRS set- tings, Login, Password and Inactivity time GPRS settings (the same fields and the same instruc-

tions as for GSM settings, please refer to the previous section).

APN allows you to enter the address of the external data network you want to connect to, a text string (or IP ad- dress, e.g., wap.operatorname.fr) used to establish the connection. Select APN and press ,, then enter the appropriate address and press ,.

Error messages during connections are mainly due to incorrect parameters: you should contact your operator before first use, in order to have the appropriate set- tings. With some operators, the access parameters can be set remotely. Please check with your operator.

Settings 45