Philips 32PF9641D/10 Introduction Digital TV, Switch the TV on, First time installation

Page 8

EN		Introduction: Digital TV

Next to analogue broadcast reception, your TV has a built-in TV tuner which receives, decodes and displays digital terrestrial signals.

Digital TV and radio channels are only available and reproduced:

-when Digital Video Broadcasting Terrestrial (DVB-T) is applicable in your local area;

-and if DVB-T signal is supported by your TV for the country you live in. See www.philips.com/support for the list of supported countries.

Switch the TV on

<Press the power switch B at the side of the TV.

>An indicator on the front of the TV lights up and the screen comes on.

<If the TV is in standby mode, press the -P+keys or the B key on the remote control.

Note: the first time (and only the first time) you switch on your TV, you see a Welcome screen followed by the installation procedure. See First time installation, p. 9.

First time installation

The installation procedure consists of a series of screens that will guide you through the installation of your TV.

Follow the instructions on screen.

Note: if the TV has already been installed before and/or you want to change the First time installation settings, proceed with Use of the TV menu settings, p. 13.

8

Image 8

Contents Contents Safety warnings GeneralCare of the screen Stationary images on the TV screenBefore you start Overview of the rear connector panelGetting started Connect the mains Remote controlConnect the antenna Use of the remote control RC4401/01 +P- Channel selection Digit keysAV Select your peripherals Previous channelUse of the Option key Keys at the right side of the TVSwitch the TV on First time installationIntroduction Digital TV Follow the instructions on screenComplete the initial TV installation procedure Select your on-screen languageSettings assistant select your TV settings How to navigate through the menus IntroductionInstallation allows you Use of the TV menu settings Adjust viewing and listening settingsChange settings in an easy-to-use manner with Settings assistantUse of the Standard settings if present Individual settings for picture, sound and ambilightAdjust picture menu settings Use the colour keys to reset to the predefined settings Pixel PlusDigital Natural Motion Dynamic contrastLight sensor Colour enhancementSelect Off, Minimum, Medium or Maximum Active control Adjust sound menu settings VolumeAllows you to adjust the sound output level BalanceSurround mode Headphone volumeAVL Automatic Volume Leveler Delta volumeAllows you to adjust the light output of the ambilights Enjoy AmbilightAmbilight BrightnessColour For exampleSeparation Ambilight in standby modeCustom colour Adjust feature menu settings SubtitleSleeptimer Select SleeptimerChildlock Important you have forgotten your codeSelect Set or Change code On timerSet code/Change code Common interface DemoHow to search for and store TV channels Installation menuSelect your language preferences Menu languageSelect your country Store TV and radio channelsThis will not reinstall uninstalled channels Already installed channels will not be renumberedIs in standby mode Not alteredAnalogue manual installation Rename Rearrange the channel number listReshuffle Set your preferences Select your locationSelect Teletext Select the On Screen Display OSDSelect your connections Select a Decoder channel numberDigital Audio Select ConnectionsReset the Factory settings How to upgrade the TV softwareUSB device upgrade Automatic software announcement if presentCreate your favourite list To select a channel from the displayed favourite listTo select another favourite channel list To create a favourite list or to modify the listCreate your favourite channels list TipsEPG Electronic Programme Guide To view content from a USB device Multimedia BrowserTo insert a USB device To remove the USB deviceFolder Pictures Music Self made playlist/album Video Multimedia Browser menuFollowing icons may appear Multimedia function keys on the remote control Function keys at the bottom of the screenTeletext Hypertext Enlarge a TeletextTeletext menu RevealDigital text only for UK Text infoConnector table Audio connection Required To make video and audio connectionsHeadphone To make video and audio connections Side panel overviewCamera, Camcorder, Game To make video and audio connections Rear panel overview Connect a VCR or DVD recorder With a eurocableWith the aerial cable only Connect a decoder and a VCRWith Component Video connectors Connect two VCRs or VCR and DVD recorderConnect a satellite receiver With eurocablesWith a Hdmi connector With a DVI connectorConnect a DVD player, Cable box or game console Connect a DVD player or Cable boxConnect a DVD player, a satellite receiver or Cable box DVDPC equipped with a DVI connector PC equipped with a VGA connectorConnect a PC 640 xConnect a Home Cinema amplifier Digital Home Cinema amplifierUse the Common Interface slot Insert a CA moduleSelect Installation Select connected equipmentRecord with your recorder Record a TV programmeTo select between Normal and Expert mode To switch the menu on or offAudio- and video equipment keys Digit entryTroubleshooting To cancel the selected mode Annex 2 Philips TV software upgrade with portable memory To prepare a portable memory for software upgradeIntroduction To verify the version of the TV softwareAutomatic software upgrade procedure AnnexManual software upgrade procedure Annex 3 Philips TV-Slideshow Format with background music General RulesGeneral Format Following syntax should be used to create the text fileSupported XML-tags Tag Name Use DescriptionAnnex 4 Philips TV Digital camera and USB issues Digital Camera IssuesUSB Memory Device Issues Digital Content IssuesPC VGA Index 11,35Recycling Product informationRecycling Disposal of batteries Disposal of your old product