EN Annex 5 - Issues referring to connected peripherals with a HDMI connector
Note: teletext will not be available via equipment connected to a HDMI connector.
The HDMI IN connector allows the following TV and monitor display modes:
HD Standard Definition TV (SDTV) | 640x480i | |
|
| 720x480i |
|
| 720x576i |
Enhanced Definition TV (EDTV) | 640x480p | |
|
| 720x480p |
|
| 720x576p |
High Definition TV (HDTV) | 1920x1080i | |
|
| 1280x720p |
PC VGA | 640x480 |
|
SVGA | 800x600 |
|
XGA | 1024x768 |
|
- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
-Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a peripheral equipment connected to the HDMI input, the Digital audio output signal is muted.
-Your TV supports HDCP
-Proper working is only guaranteed with HDMI compliant consumer products. Limit the cable length to max. 5 m.
-Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display.
-In case no signal is detected from your HDMI equipment, switch off the HDMI equipment and then on again.
To get an optimal viewing, it is advised to switch your DVD player,
64